Pricing Question
Hi There- I am in Ontario Canada so the prices wont be exactly the same as the USA- but I still have a pricing question. I have another Cadillac guy bugging me for my 1964 Headlight buckets and vacume canister. I need to know what they are worth as I don't want to over charge him or ask too little. They are off a very low mile car with no damage- only chipped paint.
Replies to This Discussion
-
Permalink Reply by 3n49omug8n28i on
-
100 for everything sèems fair enough. To get that stuff shipped to his door would probably be a bit more.
-
Permalink Reply by Jason Edge on
-
I sell the 64 vacuum canisters with tested check valve for $50, and the fender extensions/headlight housings in from $50 to $75 each depending on condition. I usually remove that inner trim piece that book ends the upper grill and sell it separate unless the person needs it. When someone buys multiple items I will usually knock some off the price. I show the headlight housings as about 5lb each so for shipping you can expect 12 lb for all three pieces. You also need to consider box size. For US Postal anything over 84" length + girth is considered a "Large" package but you should be able to get these in a box considerable smaller than that.
Photos
Members
Forum
My Only Eldorado Parts Car - A 1963 Picked up in 2001
Started by Jason Edge in General Discussion. Last reply by Jason Edge 6 hours ago. 2 Replies 0 Likes
I was thumbing thru parts car folders and run across the 63 Eldorado I parted out way back in 2006 and saw the dirty but good condition body tag. I like to clean them up I guess as a token and of…Continue
Anybody in Reno or Lake Tahoe area?
Started by Mack in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies 0 Likes
We have a group of Cadillac guys in Reno/Tahoe area and we will be cruising and participating in the local car shows this season!let me know if you’re in the area and wanting to join in.happy…Continue
Adapt, Improvise and Move an Cadillac Engine!
Started by Jason Edge in General Discussion. Last reply by Jason Edge on Friday. 3 Replies 0 Likes
Just wanted to pop in and say hello and give a quick update on a couple of things and share a garage thing I thought you might get a kick out of. First, my arm is out of the brace as of last Monday…Continue
Front Fender Skirt Backing Bracket Access – Question + Cad Plate Love
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb on Friday. 2 Replies 0 Likes
Hello all,I’m in the middle of swapping out the front fender skirt backing brackets on my ’64 Fleetwood and had a quick question for the group. I picked up a beautiful fresh set of cadmium plated…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
