Pulling in Parts Car #54
Back to the hotel in Hickory NC with parts car #54 - a 1964 Series 62 Four Window Sedan. Lots of goodies on this beauty! Headed home with our prize tomorrow.
Replies to This Discussion
-
Permalink Reply by 0ohxwnggz2vlp on
-
I still need a good glove box door latch my friend...
-
-
Matthew, I have a glove box latch if you are still looking.
Ian Osborne
-
-
Looking for a flexplate for my 64 DeVille. Let me know if it's available my man.
-
Permalink Reply by Jason Edge on
-
Hi George, Email me at jasonedge@nc.rr.com to go on the Wait List. I have a few already on the list and of course this parts car has the Hydramatic driveplate.. so it will be a future parts car that starts to whittle down the list.
-
-
Gotcha. I should be on your list already. Thanks my man.
-
-
George. You are #5 of 5 with the first dating back to late 2018. I noticed none on the list are CLC or Chapter members. Join the CLC, then our Free Chapter and you will go to the front of the line and get first preference on all parts and 10% Discount.. OH. and you join the coolest car club on the planet and start receiving the award winning Self-Starter Magazine, and can join regions, attend Grand Nationals, go on driving tours and many other perks. It's a Win-Win-Win..and a few more Wins to boot!
-
-
Wow.. I knew it wasn't gonna be easy to find the flex plate but 3 years someone's been looking.? That's kinda a bummer. I'll check out the CLC when I get a minute and sign up. Thanks again.!
-
-
I've got 66 customers that have been waiting for really hard to find parts since 2013. The earliers entries are 2009.
-
-
George, I may have sourced a flex plate for you. email me please; russ85747@hotmail.com with your zip code for a shipping quote.
-
-
Will do
-
Permalink Reply by Wayne Morris on
-
I'm still looking for a right brow molding for my 64 series 62. I should be on your list
-
-
You are on my list and will remain there until I find one or you let me know you no longer need. You are currently #2 on the list. Join the CLC and our 63/64 Chapter and you would bump up to #1 spot.
Members
Forum
Front door handle lights not working
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt 2 hours ago. 3 Replies 0 Likes
My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue
4,442 Pounds of Cadillac Metal Cadmium Plated! - Pick-Up 12th batch Thursday
Started by Jason Edge in General Discussion. Last reply by Chris Codd 2 hours ago. 1 Reply 0 Likes
Vintage Promo Picture #4 - 1963 Fleetwood 60 Special in Nevada Silver
Started by Jason Edge in 1963/64 Cadillac Specific Discussion 4 hours ago. 0 Replies 0 Likes
Here is the 4th picture in my collection of "Promo Pictures" - another 1963 Fleetwood 60 Special. This 60 Special appears to be Nevada Silver, Paint Code 14. …Continue
lighted headlight switch
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Saturday. 2 Replies 1 Like
I had to replace the heater core in my 63 SDV, so I decided to replace all the dash lights with LED's. and replaced all the vacuum lines. While I was in there, I added a light to the headlight switch…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
