Pulling in Parts Car #54
Back to the hotel in Hickory NC with parts car #54 - a 1964 Series 62 Four Window Sedan. Lots of goodies on this beauty! Headed home with our prize tomorrow.
Replies to This Discussion
-
Permalink Reply by 0ohxwnggz2vlp on
-
I still need a good glove box door latch my friend...
-
-
Matthew, I have a glove box latch if you are still looking.
Ian Osborne
-
-
Looking for a flexplate for my 64 DeVille. Let me know if it's available my man.
-
Permalink Reply by Jason Edge on
-
Hi George, Email me at jasonedge@nc.rr.com to go on the Wait List. I have a few already on the list and of course this parts car has the Hydramatic driveplate.. so it will be a future parts car that starts to whittle down the list.
-
-
Gotcha. I should be on your list already. Thanks my man.
-
-
George. You are #5 of 5 with the first dating back to late 2018. I noticed none on the list are CLC or Chapter members. Join the CLC, then our Free Chapter and you will go to the front of the line and get first preference on all parts and 10% Discount.. OH. and you join the coolest car club on the planet and start receiving the award winning Self-Starter Magazine, and can join regions, attend Grand Nationals, go on driving tours and many other perks. It's a Win-Win-Win..and a few more Wins to boot!
-
-
Wow.. I knew it wasn't gonna be easy to find the flex plate but 3 years someone's been looking.? That's kinda a bummer. I'll check out the CLC when I get a minute and sign up. Thanks again.!
-
-
I've got 66 customers that have been waiting for really hard to find parts since 2013. The earliers entries are 2009.
-
-
George, I may have sourced a flex plate for you. email me please; russ85747@hotmail.com with your zip code for a shipping quote.
-
-
Will do
-
Permalink Reply by Wayne Morris on
-
I'm still looking for a right brow molding for my 64 series 62. I should be on your list
-
-
You are on my list and will remain there until I find one or you let me know you no longer need. You are currently #2 on the list. Join the CLC and our 63/64 Chapter and you would bump up to #1 spot.
Members
Forum
Wanted Cadillac Lasalle 2 inch Windshield Decal Sticker
Started by Doug Scarrow in Wanted to Buy. Last reply by Dennis P. DiBari yesterday. 3 Replies 0 Likes
for close to 20 years I have had a lovely Club Decal on my windshield now I wish to replace the windshield and would love to buy a decal if any one has one available See attached photosContinue
Back to the 50’s
Started by Jordan Johansen-Moe in 1963/64 Cadillac Specific Discussion. Last reply by Jordan Johansen-Moe on Tuesday. 2 Replies 0 Likes
Is anyone here planning on going to the Back to the 50’s car show in Minnesota?
where to find 1963 Cadillac Plastic Door Pin Anchors
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge Jun 15. 2 Replies 0 Likes
Hi allwhere can I find these - 1963 Cadillac Plastic Door Pin Anchors. Mine are from1963 and a little tiredThanksContinue
Rear Main Seal Oil Leak Fix with Bearing Cap Modification
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth Jun 14. 15 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
-
June 22, 2024 - 63/64 Cadillac Chapter Zoom Meet-Up
June 22, 2025 from 8pm to 9:30pm – Zoom
0 Comments 1 Like
Videos
© 2025 Created by Jason Edge.
Powered by
