Rebirth of a Cadillac....
Rebirth of a Junk Yard 1964 Cadillac in Upcoming January Newsletter.... stay tuned
Replies to This Discussion
-
Permalink Reply by 3n49omug8n28i on
-
Looks like my car just a little rougher around the edges. That looks like a Canadian car from the Ottawa area that I've read about before.
-
-
Very nice looking great potential!
-
-
This car has no business sitting in a salvage yard; looks straight and mostly complete. What the heck are some people thinking? Just unreal.
-
-
Sweet!
-
Permalink Reply by Jason Edge on
-
Here's an excerpt of this car's story, which will be published in a few days in our January Newsletter:"When I raised the hood what I saw was bad enough to bring tears to your eyes. He had used a cutting torch to remove the engine and transmission. In the process he had cut EVERYTHING. All the brackets for the alternator and power steering pump were cut, all the supports for the transmission were cut, all the power steering hoses, rad hoses and transmission cooler lines were cut along with most of the wiring harness. He had also cut the engine mounts- all with a torch. I knew this was going to make this restoration that much harder. Looking at this massacre, I became even more determined to bring her back. "Stay tuned for more...
-
-
Could this be my long lost 63?
-
-
No this is a 1964 4 Window Sedan de Ville. Scroll up to the top and you will see a picture.
-
-
Jason, That sounds interesting and I'm looking forward to reading the full story. From what I have read here, the car sounds like a lost cause and if it was me doing the restoration, I'm thinking I would have kept looking for another car to start with even though the exterior looks solid and straight.
-
-
Full story just posted - www.newsletters.6364cadillac.com
-
-
You'd wanna kill the old guy for what he did to remove the olds engine.
Good save of a 64 though and a nice feel good story.
-
-
Interesting read and a good story. That would be a real bummer to buy the car only to have it butchered by the seller before receiving it. The buyer did mention he had heard that the junkyard owner was a crusty old guy but that's still seriously uncool.
-
Permalink Reply by Chris Codd on
-
Is this the guy from YouTube that goes by Cadillacguy100 because this car looks exactly the same as his?
Members
Forum
Dino Radiator Leak - Time to Recore!
Started by Jason Edge in General Discussion. Last reply by Bill Wolf yesterday. 36 Replies 0 Likes
I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue
front seat crest
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Friday. 2 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
64 Replacing dash illumination lights-how much has to come out to get to all of them?
Started by Norman Silverman in General Discussion. Last reply by Norman Silverman on Thursday. 11 Replies 0 Likes
Hello AllI have taken off my dash top and started replacing dash bulbs with LED's for greater visibility. Some questions:1) To replace the Gauge bulb it looks like easier access is had by removing…Continue
Correct whitewalls
Started by Richard Stanley in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Wednesday. 3 Replies 0 Likes
I just replaced my tires from Diamondback (I had bad results in the past from Coker). It was the second time, due to the age of the tires. About 18 years ago Diamondback made custom whitewalls…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
