RH Passenger Door Mirror Installation - New Holes Needed in Door

With the RH passenger door mirrors now available, there will be many looking to install one on their 1963 or 1964 Cadillac. A template aligned with the edges of your door, showing the exact location of the 3 holes would be ideal, however, I thought I would share the specs on the holes you will need to install your mirror since my 1964 Coupe de Ville came with the rare dealer installed RH mirror.  

FIRST: I recommend removing your LH mirror. To remove you simply loosen the Allen screw in mirror control handle and remove the retaining screw at front top of the door. Slide mirror back and it will lift up and off the door. You will be left with an excellent template for the RH door mirror. The only difference will be you will not need the larger center mounting hole on the RH mirror. See below for details.

There are many ways to make measurements of the 3 holes on the top, however, this is what I did:
1) I measured from top door ridge up to bottom of mirror hole.  Since the mirror holes are basically parallel to the top door ridge, each measured 3 71/6" from the ridge line.

2) I measured from front door edge back to the forward edge of the hole. Measurements were 2 3/16", 3 11/16", and 5 3/16" starting at front hole.

3) I measured diameter of the hole. They are 3/4" in diameter. Note on the LH door more the center hold is 7/8" in diameter due to the center control rod. Since the RH mirror does not have the control rod, you only need a smaller hole for the mirror arm base attachment, and only need a 3/4" hole.

- Attaching Screw Hole in front top of Door. Look at your LH door front top where attaching bolt goes. The RH door mirror attaching screw goes in same location on the RH door. There is a roundish area where the screw hole needs to be drilled.  Drill a 3/8" hole in the very center of the round attaching area. (Note from the factory, I get measurements of 7/16" but do not believe it needs to be that big... just enough to move the screw around to find the thread in the base of the drill.  

- LH Driver Door Mirror Comparison. For a sanity check, I compared all measurements above to LH core doors I have on and all measurements were consistent with and approximate to the RH mirror hole specs above.    

I hope that helps in the installation of your RH mirror! Below are pictures I took that go along with the description above:

Here is a picture of the RH mirror installed on my 1964 Coupe de Ville:

Views: 967

Reply to This

Replies to This Discussion

I have the template to drill the holes, if anyone needs it.  Just drop me an email, and I will send it to you for free.

russ85747@Hotmail.com 

Hi if you still have a template could you please send me one. Thanx

Mark, send me an email and I will reply with the factory template.   russ85747@hotmail.com 

Added link to our Help Page.

RSS

Photos

  • Add Photos
  • View All

Forum

Too Cold to Do Much with Dino Right Now

Started by Jason Edge in General Discussion 6 hours ago. 0 Replies

North Carolina can be pleasant in the winter, with temps mild (60's/70's in the day and 40's and 50's at night); however, yesterday when I got up it was 20, and the has been in the mid 40's, Today it…Continue

What To Do With Those Damn Coil Springs?!

Started by Jason Edge in General Discussion 10 hours ago. 0 Replies

Coil Springs is one part I generally do not sale (who wants a tired used coil spring), but it is also one of those items I just can't let go up. I have painted them, stuck lights in them, put them…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 1 Reply

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

64 cadillac deville convertible interior

Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Tuesday. 1 Reply

Hello everyone. I am trying to sort out a interior order that came to me with the wrong diamond pattern and no buttons. They are going to fix it but I would like to include some pictures of the…Continue

Blog Posts

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service