Just confirming some parts and fluids for a “master list” for 64 I’ve been attempting to curate. Would love your input!
This may be a fairly polarizing list and some may not agree. I intend this to be a growing list of common serviceable items. Yes, I know most are listed in the manual. But that was published 60 years ago, some of that stuff isn’t available anymore. Obviously, YMMV and by no means is this list gospel. I just think it’d be helpful to have one thread with most of the common parts and part #s for easy access
1964 Cadillac
Serviceable items
Air Filter
⁃ AC DELCO A63C
⁃ Wix 42080
Oil Filter
⁃ Wix 51049
⁃ Fram PH25
Oil
⁃ Rotella T4 15w40 (no ZDDP needed)
⁃ Valvoline VR1 10w30
-or utilize any of the describe weights in the shop manual
Power Steering Fluid
⁃ ATF (Dex III)
Break Fluid
⁃ Dot 3/4
ATF
⁃ Dex III
⁃ Chevron is a good brand for Dex III replacement
Coolant
⁃ any green stuff
Spark Plugs (.035 gap)
⁃ Champion RJ12YC
⁃ Autolite 85
⁃ AC 44 (43 or 45 work as well for one step in temp either way
Tags:
That's a good start, and thanks for your time and effort.
For oil, I also like Joe Gibbs Driven (available on Summit and others.) High ZDDP and lots of viscosity and blend choices.
I will never use a Fram oil filter. They are very cheaply made inside.
If you ever cut one open you'll know why you don't want to trust your engine to it.
I like Wix or NAPA. And most of the premium-priced ones.
I have heard this about Fram filters. I am ashamed to admit my 64 Fltwd has a Fram on it now-but I needed one in a pinch and knew that one would fit. Truth be told-trying to find a more serviceable replacement for the oil filter is what led me down this rabbit hole to create a list for myself to refer back to with what people are commonly using. Figured others may find it useful as well.
I will have to check out Joe Gibbs. I like the idea of using a high ZDDP oil to begin with and not fiddling with additives.
Thanks for the addition!
I have been using Valvoline VR1 Racing oil for about 2 decades now. It comes conventional or synthetic, 10W-30 or 20W-50. Not the highest zinc content but much higher than your regular oil. You can usually find these at AutoZone and other local auto parts stores.. at least the last time I checked, or Amazon can have it to you in a day.
As far as filters, there are reproduction original style filters out there with the attached nut at bottom. They are not cheap if you can find them but seem to be very high quality. Here are a couple of examples. If you just need a filter, almost all will work fine. I used Fram for first 10 years not knowing they were supposedly bad quality, but had zero issues with them. I know use the original style sourced filters. Here is a picture of a couple of them. I ended up having to get them from another GM make repro site then painting the Cadillac Blue but they are the correct filter shown in all the original literature.
Thanks Jason! As always. I appreciate your expertise on these vehicles.
Do you happen to have a link or a part # of the original filters?
-Logan
I will try to find that link.
Started by Jason Edge in General Discussion. Last reply by Bill Wolf 2 hours ago. 36 Replies 0 Likes
I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf 14 hours ago. 2 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Started by Norman Silverman in General Discussion. Last reply by Norman Silverman yesterday. 11 Replies 0 Likes
Hello AllI have taken off my dash top and started replacing dash bulbs with LED's for greater visibility. Some questions:1) To replace the Gauge bulb it looks like easier access is had by removing…Continue
Started by Richard Stanley in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Wednesday. 3 Replies 0 Likes
I just replaced my tires from Diamondback (I had bad results in the past from Coker). It was the second time, due to the age of the tires. About 18 years ago Diamondback made custom whitewalls…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by