While out for a Sunday cruise this afternoon, I had a small heart attack when I opened up the throttle a bit and went to let off, only to have the ol girl keep going. Luckily, I was on a straight piece of roadway in a familiar area in the country and pulled off keeping the throttle pulled up with my foot.
Upon inspection, it appears the main vacuum line that comes from the rear of the carb/manifold to the bottom of the break booster was replaced at some point and was routed near where the throttle arm mounts to the firewall. When I opened the throttle, the hose got caught in the space and wouldnt let the throttle return all the way.
My question is this-what is the correct routing of this vacuum line so that it avoids the throttle? It was also a little closer to the valve cover than I felt comfortable with.
I'll include some photos of how it is presently.
Thanks!
Logan
1964 Fleetwood
Tags:
When the throttle was stuck, the tube was on the right side of where it is now. However, this cant be the correct routing as it rubs the valve cover and moved when the throttle is pushed.
Should there be a hose clamp on the vacuum line for the booster?
As you can see, the vacuum tube from the bottom of the booster has been zip tied to the factory mount
Ah. So it looks like I’ll need to route it further up the firewall and back down.
I may as well replace this hose as well. Would regular vacuum tubing work or is this a special type? It’s rather thick. It looks heavy duty in your post as well.
I noticed that your booster port location is in a different spot as well. There has been some discussion around my Bendix booster. I think we determined my booster is from a 63
Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 2 hours ago. 5 Replies 0 Likes
Hi there,after another long pause with health and family trouble I'm back on the roadwith my CdV.Had some work on front suspension and so needed realignment of the wheels.While camber and toe in is…Continue
Started by Jason Edge in Trivia. Last reply by Jason Edge 3 hours ago. 3 Replies 0 Likes
Here is another part I have seen many times but might not be familiar to many and will post up as our next trivia question.So, looking at the pictures below ... WHAT IS IT?…Continue
Started by Jason Edge in General Discussion yesterday. 0 Replies 0 Likes
As I put our 2024 Grand National Newsletter edition together, I will also be sharing pictures of Chapter Member cars on our website and Facebook Page, etc. First up is John Warner's incredible 1963…Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Monday. 0 Replies 0 Likes
So, I get the question about headers for our car from time to time, including an email this morning.Here is my standard response:"Sanderson Headers is the only company I have never known to make…Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by