While out for a Sunday cruise this afternoon, I had a small heart attack when I opened up the throttle a bit and went to let off, only to have the ol girl keep going. Luckily, I was on a straight piece of roadway in a familiar area in the country and pulled off keeping the throttle pulled up with my foot.
Upon inspection, it appears the main vacuum line that comes from the rear of the carb/manifold to the bottom of the break booster was replaced at some point and was routed near where the throttle arm mounts to the firewall. When I opened the throttle, the hose got caught in the space and wouldnt let the throttle return all the way.
My question is this-what is the correct routing of this vacuum line so that it avoids the throttle? It was also a little closer to the valve cover than I felt comfortable with.
I'll include some photos of how it is presently.
Thanks!
Logan
1964 Fleetwood
Tags:
When the throttle was stuck, the tube was on the right side of where it is now. However, this cant be the correct routing as it rubs the valve cover and moved when the throttle is pushed.
Should there be a hose clamp on the vacuum line for the booster?
As you can see, the vacuum tube from the bottom of the booster has been zip tied to the factory mount
Ah. So it looks like I’ll need to route it further up the firewall and back down.
I may as well replace this hose as well. Would regular vacuum tubing work or is this a special type? It’s rather thick. It looks heavy duty in your post as well.
I noticed that your booster port location is in a different spot as well. There has been some discussion around my Bendix booster. I think we determined my booster is from a 63
Started by Joe McDonald in General Discussion 1 hour ago. 0 Replies 0 Likes
Hey all,Not sure if this is the right section of the forum to post this or not. I just picked up this 1964 Coupe deVille. I'm the third owner on it and it appears to have been a Spokane Washington…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies 0 Likes
As the Fall Festival approaches, I am finding myself curious if anyone else will be attending from the group?I am hauling my Fleetwood up. I am hoping to see lots of other 64’s!Continue
Started by Jason Edge in General Discussion. Last reply by Jason Edge Sep 1. 3 Replies 0 Likes
Started by Daniela in 1963/64 Cadillac Specific Discussion. Last reply by Doug Scarrow Aug 31. 10 Replies 0 Likes
All,I can’t believe I have to ask for help again. I really thought I was done with repairs. I did drive my 63 Eldorado a couple of times on side roads and all was good. last week I took it out bc it…Continue
Tags: overheating, transmission, NewRadiator
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
© 2024 Created by Jason Edge.
Powered by