Thanks to Jason making a 900 mile trip thru Illinois, I am moving forward with pulling the trans on my Fleetwood and replacing it with the one Jason is bringing for me!
That being said, I’ve already been in contact with Fatsco to order some of the other seals I’ll need. Fatsco did NOT have the trans mounts however.
Since the mounts will be accessible while the trans is out of the car, might as well replace on those. Where would be a reputable source for these mounts?
Further, how do I ensure everything is lined up properly? Are there shims needed as well? Is there a guide that I should follow?
As always, thanks for the help!
Tags:
You can get the rear mount at CaddyDaddy.com It is a better mount than the stock one. Same shape and size, but engineered better so it wont collapse like the originals.
The trans has guide pins and will self align to the engine. The rear will almost take care of itself, just have the mount bolts centered in the bolt holes.
Would engine mounts be more accessible during this operation as well?
Started by Jason Edge in General Discussion 20 hours ago. 0 Replies 0 Likes
If on a desktop or laptop, (or in desktop view mode on a mobile device) check out the header and you will see Steven Schneefuss' 1963 Coupe de Ville and Larry Rees' 1964 de Ville Convertible…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 14 Replies 0 Likes
Late in the evenings, I wonder about things I will probably never do as I am not that crazy. However, I know someone out there has tried it or wanted it bad enough they have done it. My 64 Fltwd did…Continue
Started by Jason Edge in General Discussion on Monday. 0 Replies 0 Likes
I received the email below and did not remember a raised roof 75 series but thought I would post here. Anyone know of or ever hear of this car?"I am a volunteer at Hillwood Museum and Gardens, the…Continue
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal Jul 25. 2 Replies 0 Likes
So I have been having problems with my brake lights. At first I thought it was both sides and turns out it is only the drivers side. Also, I thought the blinker worked and it didn’t and turned out…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by