Transmission tail shaft bushing (s) and seal for 64 with TH400
Now that I have acquired a transmission mount for my car I want to also buy a transmission tail shaft bushing (s) and seal. I remember Clovis mentioned he replaced his a while ago-any chance part numbers could be shared?
Thanks
Norm
Replies to This Discussion
-
Permalink Reply by Norman Silverman on
-
Interesting-the tech who worked on the car mentioned wanting to check that when he did his test drive. I guess it was good. The remaining vibration is speed sensitive and feels rotational. That said, however, I'm going to ask if that inspection was actually done.
Thanks, Russ!
-
-
After thinking it through a bit more carefully, I believe whatever was the original source of vibration is still there but because the drive-line "anchorage" has been tightened and strengthened, the manner in which the vibration is now experienced has changed. Just for "shitz and giggles" do you know where I can buy the bushing (s) ? Thanks!
-
-
Thank you!!
- ‹ Previous
- 1
- 2
- Next ›
Members
Forum
1963/64 Cadillac Chapter March 2025 Newsletter Posted
Started by Jason Edge in Newsletters. Last reply by Matti Roth on Monday. 2 Replies 0 Likes
I have just completed and posted the March 2025, 1963/64 Cadillac Chapter Newsletter to our…Continue
Dino Diaries - Feb 28, 2025: What's Good for the Convertible is Good for the Coupe!
Started by Jason Edge in General Discussion. Last reply by Jason Edge on Monday. 6 Replies 1 Like
I have made some "factory" upgrades to my 64 Coupe de Ville by installing some options available to my Coupe de Ville such as power vent windows, tilt steering column, am/fm, 3 way rearview mirror,…Continue
Sabre Spoke Wheels
Started by Alan Grst in 1963/64 Cadillac Specific Discussion Feb 28. 0 Replies 0 Likes
Greetings, I have a set of Kelsy Hayes Sabre Wheels # 38612. Will these fit my '64 sedan? Do I need to make any modifications?Thanks!AlanContinue
Blog Posts
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Events
© 2025 Created by Jason Edge.
Powered by
