Trivia Question 23 - NAME THAT PART!
OK, We have not done trivia in a while and ran across this items yesterday working on a parts car and thought it would be a good trivia question. See picture below and name that part!
Two hints: It fits inside something and definitely not something you would find on every 1963/64 Cadillac.
Replies to This Discussion
-
Permalink Reply by Ray Schick on
-
Is it inserted into a hose to prevent collapsing ? Or is it used on a door panel like for a window crank ? Or is it put in the gas tank neck to prevent someone from siphoning gas ….
-
Permalink Reply by Jason Edge on
-
OK... 3 guesses and the 3rd is correct. It is rather large, and goes in the metal gas tank filler neck to prevent siphoning gas. I guess it would prevent anything from getting pushed into the tank.. but siphoning gas prevention would be the main use!
SO, RAY.... HAVE A CIGAR!!!
-
Permalink Reply by 24ro8f5mbs2jc on
-
Size matters. Even if wife says it doesn't... ;-)
Can I suggest using a reference like a BIC-lighter or a soda-can to get an idea about size for next trivia?
-
-
I intentionally didn't want to give a size reference! In fact I tried to take picture in a way that would not indicate size. Makes it more fun not knowing the the size!
Members
-
Travis J. Hensley Online
-
-
Forum
Gump(Pat Westphal) you’re a gosh darn genius!
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal 22 hours ago. 2 Replies 0 Likes
So I have been having problems with my brake lights. At first I thought it was both sides and turns out it is only the drivers side. Also, I thought the blinker worked and it didn’t and turned out…Continue
Front grill
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Tuesday. 11 Replies 0 Likes
Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue
Steering slack/play
Started by Nile Bolen in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Monday. 4 Replies 0 Likes
I checked the Help page and did a search on the site but didn't see any subjects on steering play/slack. Since I had someone complete a front end rebuild (Kanter kit, all the control arm bushings,…Continue
Add cruise control/Aftermarket Cruise control
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Vogler on Monday. 12 Replies 0 Likes
Late in the evenings, I wonder about things I will probably never do as I am not that crazy. However, I know someone out there has tried it or wanted it bad enough they have done it. My 64 Fltwd did…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
