Jason Edge's Comments

Comment Wall (187 comments)

You need to be a member of 63/64 Cadillac Website to add comments!

Join 63/64 Cadillac Website

At 8:50am on August 2, 2021, SVEIN ERIK MORTENSEN said…

Thank You!

At 6:52pm on July 19, 2021, Brian and Dorothy Lewis said…

Hi Jason.  Your recent post about waxing your trumpet horn cracked me up.  It was also a reminder that this rare option is becoming harder to find.  Please add me to your list for this mythical beast...dollars don't mean much to me for this item. I am also just touching base with you about being on your list for a commercial sway bar.  cheers

At 2:32pm on June 25, 2021, Tom Watling said…

thanks Jason, I have a low mileage '64 Eldorado Convertible that I'm bringing back to life, looking for heater hoses, a pair of red rear floor mats and an original spare tire cover. any help or leads would be greatly appreciated. many thanks, Tom

At 9:43am on June 11, 2021, Les Rayner said…
Thanks Jason for the approval to the group.
At 10:59am on March 11, 2021, Paul E Sheinheit said…

Thanks for adding me Jason. I was a member of the site before (many years ago), but was not active for a while. You sold me several parts for my 63 CDV when I lived in Florida. 

Paul.

At 1:27pm on December 7, 2020, Mark Sullivan said…

Thank you Jason. I was hoping to speak with you first before posting. I recently sold my 64 coupe that we had for 20+yrs and now that I have retired have started to thin out my automobilia collection. I have come across all the literature I had collected years ago for the 1964 and am trying to get it organized. In my research I am unable to find anything on several of the items so I was hoping to have some of the members help out with valuation input. My intention is to then sell everything as one lot. I have never offered it for sale before either online or even locally so this seemed like the most logical starting point as I am hoping the members will find some of the stuff interesting. I would appreciate any of your guidance as to how to best approach doing this. Regards, Mark Sullivan

At 11:12am on October 11, 2020, Michael Vogler said…

Thank you, Jason.

Mike

At 7:36pm on September 27, 2020, Ross A Klein said…
Hi. Thanks for message. I have joined. The sites a bit confusing to me at first and I don’t see membership number as requested on my receipt. Sorry.
https://www.cadillaclasalleclub.org/members/invoice_view.asp?id=37F794DC-1C42-4974-A84E-40CFFF5948DA
At 12:00pm on April 13, 2020, Marc Robic said…

Hi Jason, I hope this message finds you safe and sound!

I am wondering if you can suggest the best way I can advertize to fellow members that my car in for sale?

At 9:07am on March 23, 2020, Bob Leistner said…

I got an email from a jamespollard1@yahoo.com. Would be a hack or spam? There is no message in this section.

At 1:05pm on February 3, 2020, Christopher Belinda said…

Good afternoon Jason,

Hope you're doing well today - I just left a message on your VM regarding some expansion plugs for a '63; specifically: rear cam plug, two threaded plugs for the rear oil galley, two front cup-style plugs, and the four plugs required to seal the rocker shaft ends.  I understand you're busy - hope to hear from you soon.

Best,

Christopher 

(413)531-9278

At 11:57pm on January 14, 2020, David Parisi said…

Hi Jason,

Jimmy has never contacted me.  Also adding friends is not easy.  How can I even know who to add since there is no list.  Sorry to be asking these questions but I do need help.

Thanks for what you can do and take care,

Dave

At 6:42am on January 10, 2020, Dallas said…

Thank you Bud ..its a pleasure to be here ...with the Cadillac breed. The finest and funnest .

At 4:16am on December 29, 2019, Brad Hess said…

I bought is said it was encouraged.

so this is free but I have to spend $  35 a year to join he clc club?

At 10:31am on October 17, 2019, Luis L. said…
Will have to cancel being a 6364 member. Because this car belongs to my 11year old son, who is on a budget so he can't sign up to C.L.C and pay fees. We have excellent knowledge on these cars. Three weeks ago we just pulled the car from storage after sitting for over 35years. We we're even going to send you pictures of our correct tires still on vehicle.
Too bad this site wasn't free.
Thank you
Luis L.
At 1:03pm on September 5, 2019, Steve Carey said…

I just joined, and have searched for my membership number. Can't find it. Where is it located?

At 12:41pm on July 21, 2019, Karl Schwarz said…

I joined the Cadillac LaSalle club. It did not give me a membership nmuber, but it gave me a Database # of  59238258. I'd like to join the 1963/64 Cadillac Chapter. 

At 11:08am on July 7, 2019, Jack Wenzinger said…

Hi Jason;

I am a paid member up through 2019.  I just searched my email and found one from you inviting me to this group on my other email account, jack@wenzinger.com.   Thanks for adding me.  Cheers.

At 10:52am on June 14, 2019, Tom Payette said…

Thanks Jason. I look forward to following you and adding anything of interest. I will do a write up as you requested and send you the photo file. Best..Tom

At 2:47am on June 6, 2019, Jesse said…
Hi Jason thanks for the add! I have some questions about your carb/intake project and wasnt sure if I could ask them here or if there is a different place to ask. If you get the chance let me know.

Thanks!
Jesse

Photos

  • Add Photos
  • View All

Forum

63 Hydra-Matic won't shift out of first

Started by Norm Waters in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 2 hours ago. 3 Replies

Hello everyone. I had a perfectly good shifting Hydra-Matic transmission until I elected to fix the leak at the dip stick tube. I just did a quick seal with gasket maker since my current tube is…Continue

Rear brake lock up when cold

Started by Cliff Johnston in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 3 hours ago. 1 Reply

Hi everyone, ever since getting the car back on the road, the rear brakes grab when they are cold and I’m moving at slow speed.  Once I get along the road and stop they are fine. I see some posts…Continue

Vacuum advance

Started by Thomas Yarri in 1963/64 Cadillac Specific Discussion. Last reply by Thomas Yarri 15 hours ago. 4 Replies

Good afternoon to all my fellow Cadillac owners! I have a question about the vacuum advance on my car. The car is a 64 without a/c and a Rochester carburetor. I noticed that I have vacuum at the port…Continue

Blog Posts

1963 series 62 convertible transmission issue

Posted by Matthew VanDeWater on June 22, 2021 at 3:03pm 1 Comment

Hello I've been restoring a 63 for way to many years. Down to almost done, but have issue with trans linkage, when column in park shift rod 2 inches short. everything original. been trying to find picture of manual rod hooked up from under car to see position of linkage. was wondering if anybody has access for pictures. I wanted to see if my manual linkage is bent  wrong out of the trans if somebody dropped the trans or something. Doesn't make sense why it doesn't work. Thanks for any input…

Continue

New vehicle in the club

Posted by Patrick Westphal on June 17, 2021 at 4:00pm 1 Comment

I was successful in getting a vehicle from the New York contact I talked about at the last club meeting. I am still trying to figure out how to post a picture of the vehicle that is tied with this comment so if you see a random picture of a black convertible in a yard, that's me haha.  …

Continue

Torque converter grab when idling in Drive

Posted by Cliff Johnston on June 14, 2021 at 8:47pm 2 Comments

Hi Everyone, been quite a while since i have been on here.

I have had an issue with the idle on my 64 Coupe Deville ever since i have had it.

With the Idle set high enough that it is smooth, but still a nice idle, the RPM seems only slightly too high for the stall of the Torque Converter. And therefore it tends to sit there and grab and lunge a bit. So until now, i have been putting the car in Neutral at the lights to stop this happening.

I've had the car dyno tuned and…

Continue

Can you help? Driveshaft Question....

Posted by Chris on May 30, 2021 at 8:55am 1 Comment

Hello!

Newbie to the group here - we have already found tons of invaluable information on the board, so thanks! We are restoring a 1963 Series 62 Convertible. We are wondering if anyone knows of a source to buy the propellor yoke flange (that bolts to the pinion flange) for the driveshaft? One of our ears partially broke off. Not sure if we can buy just the yoke flange as an aftermarket part, or if it has to be rebuilt by a welder/fab guy? Maybe a salvage yard for a source? Again, any…

Continue

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service