I see other members have put LS engines into their cars. I am wondering what springs you put in afterwards. I cannot determine the height due to the car having a front end fire (how I ended up with it) so the driver spring is weak and sagging.
Tags:
If you've already dropped the engine in the car, why not just jack up the sagging side to the same height as the non-sagging passenger side and see if you like the height. Jamco sells lowering coils if it sits too high.
Going with 2" drop springs in the front. Should yield me 1" lower than stock ride height hopefully. Match the rears after the fronts are installed.
Started by Jason Edge in General Discussion 5 hours ago. 0 Replies 0 Likes
Just to share a few things:- We will have our next Zoom meet-up this Sunday, Feb 23 at 7pm. I will send a notice out tomorrow with the link then again Sunday. If you cannot make it that is fine, just…Continue
Started by Jason Edge in Chapter Discussion 5 hours ago. 0 Replies 0 Likes
As I work on the next newsletter (finally) I often start with our new (or returning) members since the last newsletter. since it had been 3 months, we have added a lot of new members and thought I…Continue
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin yesterday. 5 Replies 0 Likes
Is this noise normal?file:///var/mobile/Library/SMS/Attachments/3f/15/BC6CEAEF-7328-499C-BCC6-18153DE3E63A/IMG_5863.MOVContinue
Started by Frank Murch in 1963/64 Cadillac Specific Discussion on Sunday. 0 Replies 0 Likes
I have a 1963 Cadillac A/C car differential. It is low miles and not a limited slip. I switch to a LSD but have this nice piece for several years. It is in San Diego, If interested let me know…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
February 23, 2025 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by