Hi all,
here are some parts under the hood of 64 Deville.
Do you recognize what they are?
Tags:
I will not answer these since I dismantle these cars all the time, but will give two hints:
- First two pictures are not under the hood... that is, not in the engine bay.
- Third picture is of bolts I just reinstalled in my fix of Dino.
Engine, transmission, front bumper, grille, lights, floor mat and seats are removed. Parts could be related to any of those.
Nope, head bolts are much bigger diameter than these bolts. Here are some more hints:
- bolts in 3rd picture are 1/4" diameter and bolts I have had cad plated and you can see if you pop the hood.. well if you hold your head at the right angle.
- 1st pic is brake related
- 2nd pic is transmission related
park brake cable clevis
trans mount to frame bolts and plate
and engine lifter valley pan bolts
Ding! Ding! Ding! You guys have a winner.
Thanks Maurice!!!
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Phillip Hill 10 hours ago. 8 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Started by Alan Clark in 1963/64 Cadillac Specific Discussion. Last reply by Alan Clark yesterday. 4 Replies 0 Likes
My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk. Anyone have a picture of the item I should find?Continue
Started by Doug Scarrow in Wanted to Buy. Last reply by Dennis P. DiBari on Saturday. 3 Replies 0 Likes
for close to 20 years I have had a lovely Club Decal on my windshield now I wish to replace the windshield and would love to buy a decal if any one has one available See attached photosContinue
Started by Jordan Johansen-Moe in 1963/64 Cadillac Specific Discussion. Last reply by Jordan Johansen-Moe Jun 17. 2 Replies 0 Likes
Is anyone here planning on going to the Back to the 50’s car show in Minnesota?
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by