"Are there things that you don't want to do to your vehicle if judging may be in your future. Things such as adding options (cruise control, trunk latching, etc.) that weren't original? Adding radiator overflow, headlight relay…"
Latest Activity
"I had my radiator recored and he said the overflow clips were too rusted to reattach. I want to install a radiator overflow on my 63 SDV. How would this affect judging if I was ever able to be ready for that. Would I still need the clips?"
"Hi Kevin, Welcome to the 63/64 Cadillac Chapter & Website. Be sure to tell us more about your 1963 Cadillac when you get a chance. Jason. "
"Hi Jacob, Welcome to the 63/64 Cadillac Chapter & Website. Be sure to tell us about your 64 Sedan de Ville when you get a chance."
"Hi Xadrian, Welcome to the 63/64 Cadillac Chapter & Website. Be sure to tell us about your 63 convertible when you get a chance."
"Jason, did your lower radiator hose come with the spring inside? I used the spring out of the old hose. Bill"
"Kurt, your seats look great, and the crest just adds the next level of style. Can't wait until I get to the point of upholstery upgrades. Nice job"
"SMS Auto Fabric did mine (smsautofabrics.com). The product quality is excellent BUT it will take FOREVER to get your order so be prepared to wait if you order from them. If you already have your leather & just need a section embossed, they might…"
front seat crest
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?See More
"Thanks, Bill. That makes sense.
This will have to wait as I am now in the middle of tracing down a short and a radio issue in my 64 Imperial. NOTE: Because the dash top comes right off on the Caddy, it is MUCH easier to do any work behind the dash…"
"I recently had to replace my water pump on my 63 SDV which I believe is original because the hose had the three ripples along the one side. BTW, this pump was cast iron. Well, taking it off, one of the 1/4" and one of the 3/8" bolts broke…"
"Norm, I was able to get enough of the end of the lower passenger side climate control bulb to get it out but was not able to get it back in that way. So what I did to replace that socket was to use a 17mm 6 point socket and a short extension to…"
Photos
Members
Forum
Future of CLC Judging
Started by Jason Edge in Restoration Discussion. Last reply by Bill Wolf 9 hours ago. 3 Replies 0 Likes
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf 10 hours ago. 7 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Dino Radiator Leak - Time to Recore!
Started by Jason Edge in General Discussion. Last reply by Bill Wolf on Friday. 36 Replies 0 Likes
I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue
front seat crest
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Friday. 2 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
