Just back with a new batch of cadmium plated parts, I like to imagine Dino saying "Ahh" as I sort through the next cad plated goodies to install. This morning I installed a cad plated fuel pump to fuel filter metal line and fittings. Dino is Happy!

Facebook Facebook

Views: 53

Reply to This

Replies to This Discussion

Jason,

Beautiful stuff and Dino looks happy for sure!

Dennis DiBari

Jason, Is most of the engine bay painted with Rustoleum Gloss Black Engine paint?

Rust-Oleum 363567 Black Automotive Body Paint Type, 11 oz - Walmart...

This stuff?

I find myself needed a good black paint often and always buy something different resulting in various shade and gloss levels of black. Would like to switch to 1 color haha

I use Rustoleum Gloss Black Engine Paint on shiny surfaces such as the air cleaner, oil filler cap, hood hinge to inner fender bracket, corner brackets, Lower Hood Latch Assemblies (the black parts),  and smaller black painted items, etc.

I use Rustoleum Semi-Gloss Black Engine Paint on wide expanses such as firewall, under hood, and inner fender, Radiator Support (maybe gloss on the top side?).

If I want to really makes something pop, like the air cleaner assembly, valve covers, etc., I use the Rustoleum Clear Engine Paint.

I also always use Rustoleum Engine Primer Grey before top coating.

Rustoleum has been switching over their engine paints and I still have a lot of the older stuff as I buy by the case but have used some of the newer "ceramic" based paints with no issue. 

Here is a quick cheat sheet of part numbers:

ENGINE GLOSS BLACK: old # 248932 - new # 363567
ENGINE SEMI-GLOSS BLACK: old # 248936 - new # --> do not see one listed
ENGINE CLEAR: old #248944 - new # 363 572
ENGINE PRIMER: old # 249410 - new # 363573

Also, I have used the 2000 degree high heat primers and paints as I have found it on sale. It seems to be ok, however nothing has seemed to go on as smoothly as the original 248923 gloss black 500 degree paint. I will try the newer ceramic versions as I deplete my old paint inventory.

Also, there are "Satin' versions of the engine black paints. Those would be OK but would have a duller appearance. My best guess, looking through 60+ years of weather, oxidation and aging, is that even the large expanses like the under hood and firewall areas were more of an semi-glass than a duller satin finish. 

I probably need to do an addendum to our Engine Paint Colors Help topics and do an under hood Paint Help topic, but may just add this as an included update for now. 

Magic, thank you!

RSS

Photos

  • Add Photos
  • View All

Forum

Back to the 50’s

Started by Jordan Johansen-Moe in 1963/64 Cadillac Specific Discussion. Last reply by CHRIS CARLSON 1 hour ago. 1 Reply

Is anyone here planning on going to the Back to the 50’s car show in Minnesota?

where to find 1963 Cadillac Plastic Door Pin Anchors

Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 2 Replies

Hi allwhere can I find these - 1963 Cadillac Plastic Door Pin Anchors. Mine are from1963 and a little tiredThanksContinue

Rear Main Seal Oil Leak Fix with Bearing Cap Modification

Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth on Saturday. 15 Replies

Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue

Future of CLC Judging

Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge on Thursday. 6 Replies

First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system.  The old system was very good, however, I believe what Bill and the…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service