I have a 1963 Cadillac differential with 80K on it. Found a limited slip a while back, and I do not think I will ever used the original diff. In is in carlsbad California 92009. Let me know if you are interested or know anybody we might be
Thanks, Frank 760-840 1350
Tags:
Frank, Are you selling the limited slip (optional controlled) differential or a regular hypoid differential? Also, what gear ratio and is this just the differential assembly or the differential assembly along with the rear end assembly? The stamp on front face of carrier will tell you the gear ratio - 1 for 3.21, or 2 for 2.94. There will be a G in front of number if it is the optional controlled differential.
Jus to add 75 Series (limos) and commercial chassis cars used two additional, lower gear ratios. You can check it out out on this Help Page: - Rear End Differentials: Gear Ratios, Controlled Differentials and S...
3.21 regular hypoid differential out of a 1963 series 62 convert made in Nov 1962 with A/C
Thanks for pointing out the missing information
Hi Frank,
I live in Encinitas and have a '64 Eldo. Surprised I haven't seen your car out cruising around.
What condition is the diff in? Other than the 80k miles.
Is it rusty? Rebuilt? Any other info?
I'd like to come by and see it and say hi, and check out your car too.
Let me know, thanks.
Van
It is fine, I found the LSD and made the switch, but there is nothing wrong with it at all. It is even pretty clean, the brake back plates are off of it because I swapped the originals to the LSD - They were powder coated. I have 2 originals that are also pretty clean
My cell is in 760 and is 840 and 1350. My Cadillac is waiting for a master brake rebuild - it is a couple of weeks from being complete again.
Thanks for the info, Frank.
My Eldo is nut-and-bolt restored, but has the 2.94s, so I was interested in the condition of your parts.
I doubt I'll make any changes to mine, as it garnered 97 out of 100 points at the CLC Nats a few years ago, but it'd be nice to meet and see your car when it's back on the road.
Let me know when, thanks.
Van
Started by Donald Swenson in 1963/64 Cadillac Specific Discussion. Last reply by Donald Swenson yesterday. 2 Replies 0 Likes
Hello,Just wondering if anyone has photos to where I need to apply new SEM seam sealer on the front of the fenders to the inner top Cowl area and the corners of the Radiator support?I am in the…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb yesterday. 2 Replies 0 Likes
I was watching a YouTube video (I'll attach it below) of a 1964 Fleetwood 60 Special revival and I noticed it was equipped with a rear defrost option (as well as nearly every other option for 1964…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb yesterday. 8 Replies 0 Likes
The wintertime blues are hitting hard as 3-6" of snow is forecasted for later this week. Share your favorite photos of your 63 or 64 Cadillacs! Spring/Summer/Fall cant get here soon enough!Thanks for…Continue
Started by allen dilley in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Friday. 2 Replies 0 Likes
My 63 Park Avenue has a leak at the differential. My accomlished, experienced, and reliable mechanic has never replaced a seal of this type. I have a pinion seal and differential gasket. I also…Continue
Tags: Replacement, Seal, Pinion
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
February 23, 2025 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by