I digitized the 1964 Cadillac Service Department (round table program) training for the Cadillac Comfort Control. Unfortunately, the original film had a violent red cast, which I did not get completely out even after a long photo editing.
Tags:
Fantastic video. Just saw it on YouTube and shared to our Facebook Page. Very detailed video. Thanks for sharing!
Do you have any more of these Roundtable Slidefilms? There were 9 in 1964 (this was Jan 1964), and 10 in 1963. This is the 1st I have seen in such good resolution!
I currently working on my second and actually last one I have. It about the autronic eye and twilight sentinel system :)
Do you know wich were the others about?
If anybody has any other, I can digitize it and send it back to the owner!
I have a 1963 measures of value #1 I can send you. It is a film you will need a projector for.
email me for more info. russ85747@hotmail.com
Christian, These are listed in the Serviceman Bulletin indexes. If you turn to the page there is a summary of the Roundtable Slidefilm. Here is the one for Weather Forecast from January 1964 as listed on page 4:
Since the new model year introductions were in the October Serviceman Bulletins, you basically need to look at the Oct 1962 to Sept 1964 Serviceman Bulletins to see items specific to the 1963/64 Cadillacs. Of course there is other great information that is often related to the 1963/64 Cadillacs in earlier and later Roundtable Slidefilms.
Below are the listings of the Roundtable Slidefilms for 1962, 1963, and 1964:
For 1962 you would look for the last 2 on page 50 and 66:
For 1963 This would cover the remainder of 1963, and starting with the slidefilm on page 52, it would be for 1964 Cadllacs:
For those listed in the 1964 Serviceman Bulletin, it would run thru the one on page 3 as the one on page 44, even though it is in the September SB, discusses changed for 1965 (Note Weather Forecast on Page 4 which was in the January 1964 issue):
Who has some of the 1963 films?
Started by Mack in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin 55 minutes ago. 3 Replies 0 Likes
So… I do have a few of 63 Coupes, all have same setup with carbs, Pertronix, shroud, new US Radiator radiators etc … but only one of them gets a bit hot when I am hauling faster than 60mph and car…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 18 hours ago. 1 Reply 0 Likes
After dinner last night, we went for a quick cruise as the weather was cooler and the sun set was looking really good!Out of nowhere, a pop up shower appeared overhead and down-poured as we were…Continue
Started by Alan Clark in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb 19 hours ago. 11 Replies 0 Likes
My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk. Anyone have a picture of the item I should find?Continue
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 6 Replies 0 Likes
Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
July 20, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by