Battery
I am looking to replace my battery for 64 DeVille. Any suggestions on the type and where to purchase?
Replies to This Discussion
-
Permalink Reply by Ray Schick on
-
Check out Menards they have the big AC deacons batteries with top posts , check your dimensions of your old battery and the placement of the + & - posts and figure out if your hold down will work . Good luck
-
-
DELCO
-
Permalink Reply by Kurt on
-
You have a few choices. You can go all out and purchase a original style replica per this article from the Help topics tab in the header above: https://6364cadillac.ning.com/profiles/blogs/original-battery-and-c...
Personally I bought a group 24 Duracell battery from Batteries Plus Bulbs and have been happy with it, It is close to the size of the original battery, just slightly narrower - group 24:(10.25 x 6.8125 x 8.875) vs group 60: (13 1/16 x 6 5/16 x 8 7/8). It still fits nicely in the original battery tray. I did put some plastic strips along the right & left sides of the tray to take up the extra space. I also peeled off all the labels and dressed it up with some 3-D printed battery caps and a Delco label.
-
-
John, I just noticed you said your car is a 64. The battery hold-down was changed in 64 to go across the 13 1/6" length of the battery unlike my 63 where it goes front to back across 6 5/16" (6.8125"on group 24). As far a I can find now the group 60 replica is no longer produced. Unless you can find a similar sized battery, you will have to use a different hold-down. I'm sure some 64 guys will chime in with their solutions
Members
Forum
Replacement Front Crankshaft Seal - 1964 Eldorado (429ci)
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion 10 hours ago. 0 Replies 0 Likes
My mechanic is having difficulty sourcing a front crankshaft seal. Can anyone recommend a replacement front crankshaft seal, and where to purchase? Amazon has a few that I think(?) are replacements…Continue
Tags: Seal, Crankshaft, Front
Logans Intake Project, 1964 Fleetwood, Progress Report #2
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin 13 hours ago. 1 Reply 0 Likes
Hello all!Just a short update this evening!I wrestled with the exhaust manifold studs and ultimately chickened out on replacing all 4 of the studs. I only replaced the stud that I spun the threads…Continue
Rear main seal
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson 22 hours ago. 5 Replies 0 Likes
Hi Everyone can somebody tell me where I can get a reliable rear main seal?I have done the end cap modification and replaced the seal twice,after around 500 miles it starts to leak again,not as bad…Continue
Scout Shows up in the Garage with "Man Bun" to Work on Cadillac!
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari yesterday. 1 Reply 0 Likes
Cheryl brought my 4 1/2 month old boy Scout out to the garage in a man-bun to help work on the Cadillac. Sometimes you just have to roll with it! (I am scared to see who she will "dress up" Bandit…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
