Anyone ever experienced the emergency brake pedal not locking in the "engaged" position. My pedal just springs back up - it won't lock when I press it. Everything else works, meaning the brakes engage, the pedal just won't stay down.
Tags:
Is that the case with the engine off? As you may know, the parking brake has a vacuum release that automatically releases the brake when it is not in Park or Neutral. The vacuum line comes from the Neutral safety switch. That said, the release mechanism could be malfunctioning. There is a manual release lever on the parking brake (push forward). You'll have to lay on the floor of the car to check everything out. It may just need to be lubed.
I pressed the pedal down this morning with the engine off and it stayed engaged. Once I started the car and put it in gear the E-brake popped up as it should. I just can't keep it engaged while thew car is running and parked for some reason.
A simple neutral safety switch adjustment may correct the issue. The adjustment procedure is in the shop manual (hopefully you have one). Not a terribly difficult job but you will be laying on the floor of the car reaching upward. You may want to remove the switch and clean and lube it. They do get brittle and crack as they age (like all of us do : ) There are a couple of Help topics on the NSS from the drop-down menu in the header of this page:
Tony is correct when he says "You can use the parking brake as an emergency brake—- if the brakes should fail and you push your foot on the parking brakes peddle ——to stop the car in a brake failure emergency." It serves as both a "park" brake and an emergency brake"
In fact it is stated right there in your owners manual: "Since the parking brake is always released when the transmission selector is in "Drive", "Low" and "Reverse" ranges, it may also be used as a fully controllable brake pedal, providing rear wheel braking only, under emergency or special conditions."
Thanks guys. Yeah, should have referred to it as the parking brake. Yep, when I first got the car the brakes didn't work so driving the car on and off the trailer I used the parking brake to stop the car. Once I rebuilt the brake system and had the car on the road the parking brake worked fine. It was just in the last few months that it failed to engage, and it's just something I figured I would try to fix.
Anders. Lighten up. Many of us on this side of the pond refer to Park Brake and Emergency Brake meaning the same thing... that "other" brake we need when we get in a tight spot when a good oak tree isn't available .... for sudden stopping or parked stopping. :-)
Started by CHRIS CARLSON in 1963/64 Cadillac Specific Discussion 5 hours ago. 0 Replies 0 Likes
An individual on Facebook was parting out a 1964 429 and transmission from a 70,000 MI sedan DeVille for an LS swap got lucky and scored this dent free oil cap before it hit the scrap iron pile with…Continue
Started by James Barnes in Restoration Discussion. Last reply by Kurt on Thursday. 1 Reply 0 Likes
Im having a hard time locating the gear for the power vent window in my 64 Eldo. The existing one has 14 teeth and all I seem to be finding are ones with 17 teeth. Any suggestions?ThanksContinue
Started by Jeff Tepper in 1963/64 Cadillac Specific Discussion on Sunday. 0 Replies 0 Likes
HI all,I found this publication on Ebay last year and bought it immediately. No one has told me that they have ever seen or heard of this publication.It was put out by the Society of Automotive…Continue
Started by Jason Edge in Chapter Discussion. Last reply by Mack Jan 25. 2 Replies 0 Likes
We have another 63/64 Chapter Member spotlighted in the January 2025 Self-Starter. In the "Letters to the Editor" section on page 6, you will see the picture below of Marlina & David Stone's…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
ContinuePosted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
February 16, 2025 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes© 2025 Created by Jason Edge. Powered by