All,
after over 18 months of headaches I finally can share a happy update!
I have my 63 Eldorado back and it is actually driving!!!
There are a couple of things that I knew will have to get done before I can take it on longer trips but the engine is running smoothly again. I take every little win at this point.
Thank you to everyone for the help and advice you gave me - without you I would have given up a long time ago.
There is a quick question I have and I hope you can help again:
The mechanic changed the temperature gauge sensor on the engine and got one from NAPA that was supposed to work but he said it does not have the correct Ohm. The temp gauge now goes directly to hot when starting the engine - he said he manually checked the temp after driving and it is not overheating which is good.
Anyone ever replaced that and has a tip/ part number for me?
Thanks again
Daniela
Tags:
Daniela, Congrats on getting the car back. I know it is a great feeling to be able to drive it again and I look forward to seeing you and the Caddy at one of our future meet-ups.
The temp sending units sold over the counter these days (and for the last few years) are crap and mis-calibrated sending the incorrect resistance (ohms) to the temp unit. Good used ones have been in super high demand the last few years and I usually stay out of them, but do have a known good one that I pulled from the last running car. I sell these for $20, which drops to $15 for you with 25% Chapter discount and can ship for $10 for a final total of $25. If interested in a good used one shoot me a PayPal to jasonedge@nc.rr.com and I will get this one on the way. Jason.
Daniela, The temp sending unit is packed and will ship out Priority today. thanks, Jason.
Thank you so much!
Yes, I got the first honks, waves and a gas station chat yesterday.
For me the most fun are the surprised faces when they realize it is a woman driving.
Daniela, so glad to hear that you've got your land yacht rollin again! Sometimes its a long road get these rigs roadworthy, but the enjoyment is so rewarding!
Tom B
It is truly a yacht but it is back on the road. There still are a couple of little things to get done but at least I am done with this chapter.
Daniela,
Congratulations on getting your ride back on the road! Please post pics.
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 10 hours ago. 1 Reply 0 Likes
I plan to do a full write up when this project is complete, however, I figured someone may get some benefit of seeing the progressions I make and the steps I took to get there. This also is a good…Continue
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch yesterday. 2 Replies 0 Likes
I have a 1963 Cadillac differential with 80K on it. Found a limited slip a while back, and I do not think I will ever used the original diff. In is in carlsbad California 92009. Let me know if you…Continue
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 3 Replies 0 Likes
The schematics are from the repair manual and show a LIGHT BLUE wire coming from the headlight switch to the dimmer switch. From the dimmer switch to the low beams on a TAN wire and to the high beams…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion on Monday. 0 Replies 0 Likes
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2025 Created by Jason Edge.
Powered by