63/64 Cadillac Website

Help with missing bolts

Hi y'all....

Hoping to get some help here. I've checked my reference material and can't seem to find this info.

My 63 convertible, non tilt steering column is missing the firewall bolts on the lower support. I'd like to put some in but don't know what size they are (looks threaded in firewall).

Does anyone know what size bolt to put through there?

Here is a pic for clarity.

Thanks in advance.

Phil

0 members like this

Facebook Facebook

Attachments:

20241102_132044.jpg, 3.4 MB

▶ Reply to This

Replies to This Discussion

Permalink Reply by Jason Edge on November 2, 2024 at 6:56pm

Those are 5/16"-18 raised ridge head bolts, 3/4" long, usually with an external lock washer, but have seen regular ridge head with split lock washer. There is also a wide 1 1/8" fender washer below the bolt and lock washer. I can set you up with freshly gold plated hardware for $12 ($9 after discount) and ship 2-3 day Priority from NC to WA for $10 for a total of $19. If interested email me at jasonedge64@outlook.com or just shoot me a PayPal to that email address.

▶ Reply

Permalink Reply by Phil on November 2, 2024 at 7:13pm

Thank you Jason! VERY helpful!

▶ Reply

RSS

Welcome to
63/64 Cadillac Website

Sign Up
or Sign In

Or sign in with:

Photos

Forum

Front door handle lights not working

Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt 18 hours ago. 1 Reply 0 Likes

My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue

lighted headlight switch

Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf yesterday. 2 Replies 0 Likes

I had to replace the heater core in my 63 SDV, so I decided to replace all the dash lights with LED's. and replaced all the vacuum lines. While I was in there, I added a light to the headlight switch…Continue

Rear suspension project

Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Robert Alan Shannon on Tuesday. 9 Replies 0 Likes

I’m starting the complete rear suspension update/upgrade-new springs and shocks,replacing spherical joint and bushings on yoke and control links! Just wondering if there are any tips to help with the…Continue

TV rod adjustment 1963 Cad

Started by Mark Geertsma in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Tuesday. 4 Replies 0 Likes

I’m struggling with my TV rod adjustment. I’ve been trying to adjust it as per shop manual, but it’s still not OK. When cold, it shifts smoothly through all four gears, when hot, it hesitates (lots…Continue

Tags: adjustment, rod, TV

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments 0 Likes

Continue

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?