Are there any other years that interchange or is it the typical 1 year only part? Need manifold without cracks.

Thanks 

Tom B 

Facebook Facebook

Views: 686

Reply to This

Replies to This Discussion

 Tom , I think the 63 thru 67  intakes are the same.

63-66 are the same. In 67, the intake was redesigned for a different carburetor. The 67 intake will not fit the 63/64, without switching to a 67 valley pan.

Thanks Russ. I assume you don't have one in stock. Would rather buy from you or Jason when I can. Tom B

I do not have any intake manifolds on hand right now.

Tom
I have a 390 intake
No cracks that I can tell
If interested, text me at 630-707-1652

I don't have a pic at the moment....but can get some when I get back home on Tuesday
Thx!!

Mark
I found a pic
Attachments:

Mark, thanks for the reply. The only way you can tell if its cracked is by looking at the bottom side of it which unfortunately  means taking it off. You can hear a manifold leak when the engine is running under a little load. I'll try to give you a call

Tom B 

Tom
Ok.....
I can remove it and look
I assumed you were referring to cracks where the mounting bolts are
Are you in need of anything else?
Mark

RSS

Photos

  • Add Photos
  • View All

Forum

Add cruise control/Aftermarket Cruise control

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Vogler 5 hours ago. 13 Replies

Late in the evenings, I wonder about things I will probably never do as I am not that crazy. However, I know someone out there has tried it or wanted it bad enough they have done it. My 64 Fltwd did…Continue

Anyone Aware of a Raised Roof 75 Series?

Started by Jason Edge in General Discussion yesterday. 0 Replies

I received the email below and did not remember a raised roof 75 series but thought I would post here. Anyone know of or ever hear of this car?"I am a volunteer at Hillwood Museum and Gardens, the…Continue

Gump(Pat Westphal) you’re a gosh darn genius!

Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal on Friday. 2 Replies

So I have been having problems with my brake lights. At first I thought it was both sides and turns out it is only the drivers side. Also, I thought the blinker worked and it didn’t and turned out…Continue

Front grill

Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari Jul 22. 11 Replies

Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service