I only saw one blog for LED lights/ headlights, I am thinking of doing the laser projector logo and also replacing the conventional headlights and door bulbs with LED, has anyone replaced and using them? Pics please of what they look like on the car.

Views: 529

Reply to This

Replies to This Discussion

Here is the link for the laser projector for the doors, I just ordered them, so I will put up some pics when I get them installed. They look pretty cool

http://www.ebay.com/itm/2-Laser-Projector-Logo-LED-Door-Welcome-Ste...

Here are what the projectors look like on the ground, I installed them under the door.

Attachments:

I converted my headlights to a LED 5/34 projector assembly. I love the result. quite a bit of cutting needs to be done--headlights rings, and mounting brackets. i bought a spare set just in case.

using H3 conversions wasnt an option for me because they spray light all over as the lenses were not designed for the way LED produces light. you NEED projectors to A) get the most out of your light focused LUX (not lumen) and B) not blind oncoming drivers with your LUMENS.

Attachments:

Those lights look pretty cool, I only see the one set on the front, from the description they are high and low beams, so you could run all 4 like that?

Or how did you wire them up?

yes they are high and low, you could wire them up to run all 4 at the same time pretty easily. i wired the right hand side with factory wiring, and jumped to the other side. the LED's draw much less current than the sealed beams I had.

I used these, they are Chinese knockoffs and we will see how long they last...but for 50 bucks ea. they are a screaming deal they are a clone of the revered JW speaker lights. (which I may upgrade too if these fail soon)

https://www.amazon.com/gp/product/B01DZU30S0/ref=oh_aui_detailpage_...

How did you mount them? After reading your post I ordered a set for my 64 DeVille and the headlight isn't believed on the back and doesn't fit into the besel. 

RSS

Photos

  • Add Photos
  • View All

Forum

Show Your Vintage, Antique or Personalized License Plate!

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Michael Buonaccorso yesterday. 13 Replies

I recently brought in an original, unrestored 1963 Indiana license plate…Continue

63 and 64 engine block interchangeable?

Started by Henrik Sonne Hansen in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Tuesday. 2 Replies

I read the section: 1963 & 1964 Engine and Transmission Facts, but still in doubt if the engine block of a 63 and 64 are the same and interchangeable?More specifically, will I be able to use all…Continue

Stuck Throttle

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb on Monday. 8 Replies

While out for a Sunday cruise this afternoon, I had a small heart attack when I opened up the throttle a bit and went to let off, only to have the ol girl keep going. Luckily, I was on a straight…Continue

Recent Minor Repairs

Started by Logan Robb in 1963/64 Cadillac Specific Discussion on Monday. 0 Replies

This is a repair I had been putting off and I am not sure why as it was nothing more than tedious. When I purchased my Fleetwood, I didn't know there was no thermostat in the water pipe, but the…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service