Does anyone know the length of the webbing of the center front seat belt? Or can anyone measure it? I got a knuckle and have the correct webbing material.

Facebook Facebook

Views: 331

Reply to This

Replies to This Discussion

Christian,

Jason had posted this in the help section:

http://6364cadillac.ning.com/photo/illustration2?context=album&...

And this:

http://6364cadillac.ning.com/forum/topics/seat-belt-fabric-length

Although no dimension is given for a front center belt, It seems likely to me that it would be the same as the other front belts without a retractor. Unfortunately that dimension is not given here. 

I do have a pair of non-retracting belts that I believe came original in my '63 convertible. I can measure those for you if you want.

Thank you Jason. If you would measure the center webbing this would be great. I have the seat belt installation instructions too, but without any dimensions.

I have the factory belts in mine, I can measure it late on today.

I always run with the arm rest down, and I have to be honest, I don't recall a centre belt in the Fleetwood.

That would be great! In Germany we need seat belts at the front center seating position to have the permission transporting 3 persons on the front bench if the outer positions already have seat belts.

Christian,

This is what I have. The short (non buckle) side is 21" and the buckle side is 42" total. I photographed that one with the buckle set half way. Obviously these measurements do not include the material that is folded over and stiched.

These measurements are very close to the ones Jason has for the retracting belts in the help section.

Perfect! Thank you so much!

Hi Christian. I checked your german, let me call it traffic law, and i saw that when a car is original and came for the first time on the road before 1970, seatbelts were not obligated. Kein anschnallpflicht.

Yes you are right if you are an adult :) Kids until 12 have to buckled up, no matter what year the car was build. It's a big problem with cars, which never had seat belts. You always need a special inspection if you add seat belts in that kind of car. That was the reason I added seat belts. My boys are 4 and 7 now.

If you don't have seat belts, the car always will be registered with 5 seats. If you have seat belts on all 6 positions, you can add the 6th passenger in your papers. Wired but that's the law in Germany ;)

Wichtiger Hinweis der Juristen: Seit 2006 gelten neue Regeln, insbesondere bei der Mitnahme von Kindern. Kinder unter 3 Jahren haben in einem Oldtimer ohne Gurte nichts verloren. Bis zu einer Körpergröße von 1,50 m oder 12 Jahren müssen sie hinten Platz nehmen. Hat der Oldtimer nur auf den Vordersitzen Gurte, so gehört das Kind in gesichertem Kindersitz auf den Beifahrersitz.
Not sure if this goes for you. Looks like you need a special seat.

Yes, that's right, too. Kids until 1,5 meter or 12 years always needs a child seat. But that doesn't have anything to do with a classic car. It's the law anyway :)

Oh man, ripped off.

I went out to measure my front centre (Oz Spelling) belts and the mighty Fleetwood doesn't have one. :-(

RSS

Photos

  • Add Photos
  • View All

Forum

Website Header - Experimenting with Rotating Member Cars

Started by Jason Edge in General Discussion. Last reply by Jason Edge yesterday. 6 Replies

I was thinking or rotating member 63's and 64's up in the header and used Mark Geertsma's 1963 Sedan de Ville as a test car. It gets a little grainy making the picture that small, but not too bad.…Continue

My Only Eldorado Parts Car - A 1963 Picked up in 2001

Started by Jason Edge in General Discussion. Last reply by Jason Edge on Monday. 2 Replies

I was thumbing thru parts car folders and run across the 63 Eldorado I parted out way back in 2006 and saw the dirty but good condition body tag. I like to clean them up I guess as a token and of…Continue

Anybody in Reno or Lake Tahoe area?

Started by Mack in 1963/64 Cadillac Specific Discussion on Sunday. 0 Replies

We have a group of Cadillac guys in Reno/Tahoe area and we will be cruising and participating in the local car shows this season!let me know if you’re in the area and wanting to join in.happy…Continue

Adapt, Improvise and Move an Cadillac Engine!

Started by Jason Edge in General Discussion. Last reply by Jason Edge on Friday. 3 Replies

Just wanted to pop in and say hello and give a quick update on a couple of things and share a garage thing I thought you might get a kick out of. First, my arm is out of the brace as of last Monday…Continue

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service