Does anyone know the length of the webbing of the center front seat belt? Or can anyone measure it? I got a knuckle and have the correct webbing material.

Facebook Facebook

Views: 345

Reply to This

Replies to This Discussion

Christian,

Jason had posted this in the help section:

http://6364cadillac.ning.com/photo/illustration2?context=album&...

And this:

http://6364cadillac.ning.com/forum/topics/seat-belt-fabric-length

Although no dimension is given for a front center belt, It seems likely to me that it would be the same as the other front belts without a retractor. Unfortunately that dimension is not given here. 

I do have a pair of non-retracting belts that I believe came original in my '63 convertible. I can measure those for you if you want.

Thank you Jason. If you would measure the center webbing this would be great. I have the seat belt installation instructions too, but without any dimensions.

I have the factory belts in mine, I can measure it late on today.

I always run with the arm rest down, and I have to be honest, I don't recall a centre belt in the Fleetwood.

That would be great! In Germany we need seat belts at the front center seating position to have the permission transporting 3 persons on the front bench if the outer positions already have seat belts.

Christian,

This is what I have. The short (non buckle) side is 21" and the buckle side is 42" total. I photographed that one with the buckle set half way. Obviously these measurements do not include the material that is folded over and stiched.

These measurements are very close to the ones Jason has for the retracting belts in the help section.

Perfect! Thank you so much!

Hi Christian. I checked your german, let me call it traffic law, and i saw that when a car is original and came for the first time on the road before 1970, seatbelts were not obligated. Kein anschnallpflicht.

Yes you are right if you are an adult :) Kids until 12 have to buckled up, no matter what year the car was build. It's a big problem with cars, which never had seat belts. You always need a special inspection if you add seat belts in that kind of car. That was the reason I added seat belts. My boys are 4 and 7 now.

If you don't have seat belts, the car always will be registered with 5 seats. If you have seat belts on all 6 positions, you can add the 6th passenger in your papers. Wired but that's the law in Germany ;)

Wichtiger Hinweis der Juristen: Seit 2006 gelten neue Regeln, insbesondere bei der Mitnahme von Kindern. Kinder unter 3 Jahren haben in einem Oldtimer ohne Gurte nichts verloren. Bis zu einer Körpergröße von 1,50 m oder 12 Jahren müssen sie hinten Platz nehmen. Hat der Oldtimer nur auf den Vordersitzen Gurte, so gehört das Kind in gesichertem Kindersitz auf den Beifahrersitz.
Not sure if this goes for you. Looks like you need a special seat.

Yes, that's right, too. Kids until 1,5 meter or 12 years always needs a child seat. But that doesn't have anything to do with a classic car. It's the law anyway :)

Oh man, ripped off.

I went out to measure my front centre (Oz Spelling) belts and the mighty Fleetwood doesn't have one. :-(

RSS

Photos

  • Add Photos
  • View All

Forum

Dino Radiator Leak - Time to Recore!

Started by Jason Edge in General Discussion. Last reply by Bill Wolf on Friday. 36 Replies

I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue

front seat crest

Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Friday. 2 Replies

Original seats had a crest on the center arm rest.  Does anybody know where I could embose a crest in new material for a reupolstry?Continue

64 Replacing dash illumination lights-how much has to come out to get to all of them?

Started by Norman Silverman in General Discussion. Last reply by Norman Silverman on Thursday. 11 Replies

Hello AllI have taken off my dash top and started replacing dash bulbs with LED's for greater visibility. Some questions:1) To replace the Gauge bulb it looks like easier access is had by removing…Continue

Correct whitewalls

Started by Richard Stanley in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Wednesday. 3 Replies

 I just replaced my tires from Diamondback (I had bad results in the past from Coker).  It was the second time, due to the age of the tires.  About 18 years ago Diamondback made custom whitewalls…Continue

Tags: width, whitewall, correct

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service