Several areas in my 64 SDV body need repair and attention. Front bumbers, grille and lights came separately with the car. There is one bigger rust damage behind passenger side front wheel. Windscreen has damage but I probably could pass MOT like it is now. Front bench fabric was badly broken in driver`s area. And many small things here and there.

I started by removing everything from trunk, and it was in quite original condition. Luckily no rust problems, only some brown old glue here and there. I vacuumed parts ajd put them back. Trunk fabric needs to be glued properly in place some day.

Facebook Facebook

Views: 981

Reply to This

Replies to This Discussion

Big step in project was yesterday: the first time to sit behind the wheel in this 64. If you think I`m happy you are right!

I do not know what is the right way to get front bench in but we did it through rear door opening. Windows down it would be easier but I have no battery yet in the car.


Congrats on the continued progress!!!   You are indeed beaming!  Better than sitting on the floor board, eh?

Front parts in place!

Looks fantastic. Also good to see  you can post again. Did you find out what the issue was?

Thanks Jason. I used your posting to test, it worked, and now all works fine.

Steering gear was leaking from steering wheel end so I removed the PS belt and moved can without power steering. Now I learned that PS need to work in MOT inspection, so I need to fix that. I thought it is big job so I bought an used steering box to be used during winter when I planned to repair the original. Then I watched couple of Youtube videos and decided to try to fix it right away. And it was actually very easy. In my case all metal parts were in good condition because the car is only 67 tmiles driven. But all rubber parts were hard and did not keep oil inside. It was first time for me to repair steering gearbox so I am very happy having again learned something new with my 64 Cadillac!

Hi Tony

I used the biggest rebuild kit available from Rockauto. Bearings included there as well.

Finally I got my 64 registered and it is ready for street traffic. Winter is coming and cruising season is over here in Finland. Already now it feels great to notice that engine runs very smooth and TH400 shifts supersoft.  Several small bits still to fix during winter. Thank you everybody for good advice and support in restoring this beauty!

Matti, We need to do a full cover Chapter Newsletter Feature on your 64 Sedan de Ville. It would be an excellent follow-up to this month's feature of Bob Schles' 63 Eldorado.  Maybe when you see Bob's restoration project write-up (hopefully in a week or two) it will inspire you to send me a few good pictures and a writeup. Your writeup can be short to long and cover any aspect of the car, but your recent restoration project would be a great subject to cover! Jason. 

Love your 64.  These cars will surprise you with comfort and quality.  Its making my 59 seem cool but meh haha.  Keep up the good work!

Thanks Tim! 

RSS

Photos

  • Add Photos
  • View All

Forum

1957 1958 1959 1960 Cadillac Eldorado Trumpet Horn 1999940 restored

Started by Doug Scarrow in For Sale 17 hours ago. 0 Replies

Rare correct Restored 1957,1958,1959,1960 Cadillac Eldorado Delco Type "S" Trumpet Horn part # 1999940 completely restored and extremely LOUD and clear . This is the horn that gives the train sound…Continue

Website Header - Experimenting with Rotating Member Cars

Started by Jason Edge in General Discussion. Last reply by Jason Edge on Tuesday. 6 Replies

I was thinking or rotating member 63's and 64's up in the header and used Mark Geertsma's 1963 Sedan de Ville as a test car. It gets a little grainy making the picture that small, but not too bad.…Continue

My Only Eldorado Parts Car - A 1963 Picked up in 2001

Started by Jason Edge in General Discussion. Last reply by Jason Edge on Monday. 2 Replies

I was thumbing thru parts car folders and run across the 63 Eldorado I parted out way back in 2006 and saw the dirty but good condition body tag. I like to clean them up I guess as a token and of…Continue

Anybody in Reno or Lake Tahoe area?

Started by Mack in 1963/64 Cadillac Specific Discussion on Sunday. 0 Replies

We have a group of Cadillac guys in Reno/Tahoe area and we will be cruising and participating in the local car shows this season!let me know if you’re in the area and wanting to join in.happy…Continue

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service