My 64 Sedan Deville body reparations
Several areas in my 64 SDV body need repair and attention. Front bumbers, grille and lights came separately with the car. There is one bigger rust damage behind passenger side front wheel. Windscreen has damage but I probably could pass MOT like it is now. Front bench fabric was badly broken in driver`s area. And many small things here and there.
I started by removing everything from trunk, and it was in quite original condition. Luckily no rust problems, only some brown old glue here and there. I vacuumed parts ajd put them back. Trunk fabric needs to be glued properly in place some day.
Replies to This Discussion
-
Permalink Reply by Matti Roth on
-
Big step in project was yesterday: the first time to sit behind the wheel in this 64. If you think I`m happy you are right!
I do not know what is the right way to get front bench in but we did it through rear door opening. Windows down it would be easier but I have no battery yet in the car.
-
Permalink Reply by Jason Edge on
-
Congrats on the continued progress!!! You are indeed beaming! Better than sitting on the floor board, eh?
-
-
Front parts in place!
-
-
Looks fantastic. Also good to see you can post again. Did you find out what the issue was?
-
-
Thanks Jason. I used your posting to test, it worked, and now all works fine.
-
-
Steering gear was leaking from steering wheel end so I removed the PS belt and moved can without power steering. Now I learned that PS need to work in MOT inspection, so I need to fix that. I thought it is big job so I bought an used steering box to be used during winter when I planned to repair the original. Then I watched couple of Youtube videos and decided to try to fix it right away. And it was actually very easy. In my case all metal parts were in good condition because the car is only 67 tmiles driven. But all rubber parts were hard and did not keep oil inside. It was first time for me to repair steering gearbox so I am very happy having again learned something new with my 64 Cadillac!
-
-
Hi Tony
I used the biggest rebuild kit available from Rockauto. Bearings included there as well.
-
-
Finally I got my 64 registered and it is ready for street traffic. Winter is coming and cruising season is over here in Finland. Already now it feels great to notice that engine runs very smooth and TH400 shifts supersoft. Several small bits still to fix during winter. Thank you everybody for good advice and support in restoring this beauty!
-
-
Matti, We need to do a full cover Chapter Newsletter Feature on your 64 Sedan de Ville. It would be an excellent follow-up to this month's feature of Bob Schles' 63 Eldorado. Maybe when you see Bob's restoration project write-up (hopefully in a week or two) it will inspire you to send me a few good pictures and a writeup. Your writeup can be short to long and cover any aspect of the car, but your recent restoration project would be a great subject to cover! Jason.
-
Permalink Reply by Tim on
-
Love your 64. These cars will surprise you with comfort and quality. Its making my 59 seem cool but meh haha. Keep up the good work!
-
-
Thanks Tim!
- ‹ Previous
- 1
- 2
- Next ›
Members
Forum
Welcome Returning Member Maurice Hamelick from the Netherlands!
Started by Jason Edge in Chapter Discussion. Last reply by Maurice Hamelink yesterday. 2 Replies 1 Like
I wanted to give a shout out to returning Chapter Member Maurice Hamelick with his 1963 Four Window Sedan de Ville which was featured in our July 2016 Newsletter. Check out the newsletter via the…Continue
Rear suspension project
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Monday. 4 Replies 0 Likes
I have started my rear suspension project with the intent to replace bushings on the control links and yoke, shocks, coils and spherical joint. I have the car on jack stands and the transaxle…Continue
4,442 Pounds of Cadillac Metal Cadmium Plated! - Pick-Up 12th batch Thursday
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari on Sunday. 3 Replies 0 Likes
Front door handle lights not working
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt May 20. 3 Replies 0 Likes
My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
