I was watching a YouTube video (I'll attach it below) of a 1964 Fleetwood 60 Special revival and I noticed it was equipped with a rear defrost option (as well as nearly every other option for 1964 incl the Eldorado horn).
Was this a dealer installed option? Is there a blower below the package tray? I didn't know this was an option hence why I am led to believe it was a dealer option-not factory.
Do we have a list or comprehensive knowledge of what dealer options were available?
PS. If anyone has an Eldo Horn and they want to part with it, please let me know!
Thanks,
Logan Robb
Will this 1964 Cadillac Fleetwood run after 50 years? Part 1
Tags:
This is a good trivia question ... in fact it was a while back. Check out this link: Click Here
The rear window defogger was a dealer option only in 1963 but a factory option in 1964. See Dealer Data Book inserts below. You will also find it on page 3 of your 1964 Cadillac Accessories booklet which you should have with your owners manual in the glove box.
1963 Defogger (Note Dealer only option)
1964 Defogger
Parts involved
The way it works is it simply draws air across the warm motor and directs onto the window.
Here is a list of all the Factory Accessory Codes. Note that not all appear on the body tag if they are not part of the core body construction.
1964 Cadillac Accessories owners manual addendum cover and page 3 with the De-Fogger description.
Note: if anyone is missing this manual I have plenty.
In the words of Vice Grip Garage, I'll Be Dipped!
Thanks for the information, Jason!
Started by Jason Edge in General Discussion. Last reply by Bill Wolf on Friday. 36 Replies 0 Likes
I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Friday. 2 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Started by Norman Silverman in General Discussion. Last reply by Norman Silverman on Thursday. 11 Replies 0 Likes
Hello AllI have taken off my dash top and started replacing dash bulbs with LED's for greater visibility. Some questions:1) To replace the Gauge bulb it looks like easier access is had by removing…Continue
Started by Richard Stanley in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Wednesday. 3 Replies 0 Likes
I just replaced my tires from Diamondback (I had bad results in the past from Coker). It was the second time, due to the age of the tires. About 18 years ago Diamondback made custom whitewalls…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by