GASP! Yes, I know tires get talked about ALL the time. So here we go again. 

235/75/R15 seem to be the standard replacement for the 8.2x15 bias ply. 

I ~REALLY~ want to put bias ply on my 64 Fleetwood, however, I think my front end needs a decent overhaul before that happens. I need tires before I’ll be able to overhaul the front end. SO. That being said, I’m looking for the best looking white wall radials for a decent price I can find. 

Close to the factory white wall spec, but if it’s a little wider, I won’t complain. Nothing too wide tho. 

Thanks all! 

Logan 

Facebook Facebook

Views: 166

Reply to This

Replies to This Discussion

Robb, I dont know what you are willing to spend, but i purchased Diamond Back Classics  8.25 x 15 Radials with a 1 inch whitewall and the pie crust edge @ the tread on the sidewall . I told them my original spare tire had a one inch white wall so they made it for me. The tire is the AUBURN DELUXE they where $1100.00 for four. Heck now days you spend that much putting tires on a half ton Chevy pickup.

How about some pics? Love to see that! That’s a reasonable price I think. $275 per. Not bad.  

It’s getting harder to find white walls at any price.  I bought four Cooper Trendsetters at a local Discount Tire several years ago at about $80 each (can’t remember if that was before or after the excise tax, disposal fee, warranty and other “add on s”).  

Another member posted a pic of this type of tire at:

https://6364cadillac.ning.com/profiles/blog/show?id=6543066%3ABlogP...

Here’s another

hth

Attachments:
Attachments:

Oh those look really nice! Thank you! 

Personally Id go with the BF Goodrich L78x15 dual white wall tires that Coker sells. The width is more like 8.85 and according to research these were strictly a Cadillac tire. They retail for 330 a tire. I know I certainly plan on getting a set as I think it'll look much better than the nubby Yokohama tires that are on the gal now.

RSS

Photos

  • Add Photos
  • View All

Forum

Replacement Front Crankshaft Seal - 1964 Eldorado (429ci)

Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Marty Smith 4 minutes ago. 1 Reply

My mechanic is having difficulty sourcing a front crankshaft seal.  Can anyone recommend a replacement front crankshaft seal, and where to purchase?  Amazon has a few that I think(?) are replacements…Continue

Tags: Seal, Crankshaft, Front

Logans Intake Project, 1964 Fleetwood, Progress Report #2

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin yesterday. 1 Reply

Hello all!Just a short update this evening!I wrestled with the exhaust manifold studs and ultimately chickened out on replacing all 4 of the studs. I only replaced the stud that I spun the threads…Continue

Rear main seal

Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson yesterday. 5 Replies

Hi Everyone can somebody tell me where I can get a reliable rear main seal?I have done the end cap modification and replaced the seal twice,after around 500 miles it starts to leak again,not as bad…Continue

Scout Shows up in the Garage with "Man Bun" to Work on Cadillac!

Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari yesterday. 1 Reply

Cheryl brought my 4 1/2 month old boy Scout out to the garage in a man-bun to help work on the Cadillac. Sometimes you just have to roll with it! (I am scared to see who she will "dress up" Bandit…Continue

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service