Hi I am new to this Discussion I currently purchasing a 64 Deville convertible and It has bias ply tires that are 15 year old they have L-78-15 tires and would like to put on radials . Question what is a good cross to radial tire and is l-78-15 the original tire size. Thanks Mark
Tags:
The 235/75R15 is a good match. Look into the Ironman tires for a white wall.
Hi Russ I am looking at the 235 75R15 in Ironman are those the RB12 after the tire size Thanks
Hey Russ what size white wall do you recommend and what was the stock width Thanks
I went with the ironmans, they ride well and feel good on the car. the width wall width is 1 inch. Not sure what the stock width is.
Original white wall width and distance from rim across the 3 tire suppliers is discussed in our Tires: Original Tires and Rims (Wheels) used on 1963 & 1964 Cad... Scroll down and you will see chart. Help Page.
Hi Russ looked at the Ironman Tires quite a few people are complaining the white wall turns brown after a year have you had this issue
Thank you Tony, So you agree with Russ Austin the 235 75 R15 ? Have you tried stick on weights for mag wheels?
I am surprised you don't run Bias Ply on your Eldo. I am strongly considering it for my 64 Fleetwood. By all accounts I have heard, the driving feel is better than radial. Bias Ply being softer. I am not a speed runner and most of the area around here is flat- so no large concerns there. The occasional jaunt on the freeway is the fastest I ever make it.
Logan
Thank you
I recently changed out my Eldo's bias ply tires for a set of radials, so I could drive the car and enjoy it a lot more.
I bought Coker's Firestone Steel Belted 721 LR78-15 "bias-look" radials with a very close to correct Cadillac 3/4" whitewall stripe. Matches the original spare in my car. Overall diameter 28.78".
Price was $334.00 each.
You can special-order tires similar to these from Diamondback (not sure Coker does this) with the sidewalls "blank", meaning there's no tire brand showing, only a size. Makes the tires look classier to me.
Mark. I just purchased a set of 820-15 Radial Damond back tires with a one inch whitewall they look very similar to the original tires which where 820-15 bias ply with a one inch white wall. $304.00 each. The original spare tire in the trunk was a 820-15 US Royal with a one inch white wall. I should have them in two weeks.
Not sure, but it i a white wall tire. I like them on my car.
Started by Jason Edge in General Discussion. Last reply by Kurt 8 hours ago. 5 Replies 0 Likes
Now that I am past the radiator project (and a couple of house projects), I can pick away at the my 64 Coupe de Ville Dino a bit. Today I installed the left driver side cad plated fender skirt…Continue
Started by Jason Edge in Restoration Discussion. Last reply by Dennis P. DiBari 11 hours ago. 2 Replies 0 Likes
Scanning thru the Feb issues of Hemmings I found a listing for Gary's Steering Wheels. I didn't think I had heard of them but looked on our …Continue
Started by Jason Edge in General Discussion. Last reply by Logan Robb 13 hours ago. 4 Replies 0 Likes
I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies 0 Likes
While I have most of the fasteners mapped out and selling with new cadmium plating, for the top side stuff, there are nuts, bolts and washers, etc. on the underside I have not completely mapped out.…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
ContinuePosted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
February 16, 2025 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes© 2025 Created by Jason Edge. Powered by