Hi I am new to this Discussion I currently purchasing a 64 Deville convertible and It has bias ply tires that are 15 year old they have L-78-15 tires and would like to put on radials . Question what is a good cross to radial tire and is l-78-15 the original tire size. Thanks Mark
Tags:
The 235/75R15 is a good match. Look into the Ironman tires for a white wall.
Hi Russ I am looking at the 235 75R15 in Ironman are those the RB12 after the tire size Thanks
Hey Russ what size white wall do you recommend and what was the stock width Thanks
I went with the ironmans, they ride well and feel good on the car. the width wall width is 1 inch. Not sure what the stock width is.
Original white wall width and distance from rim across the 3 tire suppliers is discussed in our Tires: Original Tires and Rims (Wheels) used on 1963 & 1964 Cad... Scroll down and you will see chart. Help Page.
Hi Russ looked at the Ironman Tires quite a few people are complaining the white wall turns brown after a year have you had this issue
Thank you Tony, So you agree with Russ Austin the 235 75 R15 ? Have you tried stick on weights for mag wheels?
I am surprised you don't run Bias Ply on your Eldo. I am strongly considering it for my 64 Fleetwood. By all accounts I have heard, the driving feel is better than radial. Bias Ply being softer. I am not a speed runner and most of the area around here is flat- so no large concerns there. The occasional jaunt on the freeway is the fastest I ever make it.
Logan
Thank you
I recently changed out my Eldo's bias ply tires for a set of radials, so I could drive the car and enjoy it a lot more.
I bought Coker's Firestone Steel Belted 721 LR78-15 "bias-look" radials with a very close to correct Cadillac 3/4" whitewall stripe. Matches the original spare in my car. Overall diameter 28.78".
Price was $334.00 each.
You can special-order tires similar to these from Diamondback (not sure Coker does this) with the sidewalls "blank", meaning there's no tire brand showing, only a size. Makes the tires look classier to me.
Mark. I just purchased a set of 820-15 Radial Damond back tires with a one inch whitewall they look very similar to the original tires which where 820-15 bias ply with a one inch white wall. $304.00 each. The original spare tire in the trunk was a 820-15 US Royal with a one inch white wall. I should have them in two weeks.
Not sure, but it i a white wall tire. I like them on my car.
Started by Patrick Westphal in For Sale. Last reply by Jason Edge 10 hours ago. 1 Reply 0 Likes
Hey everyone,I have a set of front bumpers, both ends and the center section, that I am looking to sell. If you are looking for these contact me and we will talk about it. …Continue
Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Norman Silverman yesterday. 5 Replies 0 Likes
Hello AllI am thinking about replacing the shocks on my 64 SDV. I want to do so with units that are closest to what was originally in the car in so far as ride quality. I believe these were gas…Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 1 Reply 0 Likes
Last night I was installing the freshly cad plated inner fender to frame rear support brace rods and remembered how this has been often missing on the many parts cars I have brought in. The thing is…Continue
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 2 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by