Transmission Mounts
Thanks to Jason making a 900 mile trip thru Illinois, I am moving forward with pulling the trans on my Fleetwood and replacing it with the one Jason is bringing for me!
That being said, I’ve already been in contact with Fatsco to order some of the other seals I’ll need. Fatsco did NOT have the trans mounts however.
Since the mounts will be accessible while the trans is out of the car, might as well replace on those. Where would be a reputable source for these mounts?
Further, how do I ensure everything is lined up properly? Are there shims needed as well? Is there a guide that I should follow?
As always, thanks for the help!
Replies to This Discussion
-
Permalink Reply by Russ Austin on
-
You can get the rear mount at CaddyDaddy.com It is a better mount than the stock one. Same shape and size, but engineered better so it wont collapse like the originals.
The trans has guide pins and will self align to the engine. The rear will almost take care of itself, just have the mount bolts centered in the bolt holes.
-
Permalink Reply by Logan Robb on
-
Would engine mounts be more accessible during this operation as well?
Photos
Members
Forum
Dino Diaries - All Jacked Up For Christmas!
Started by Jason Edge in General Discussion. Last reply by Jason Edge 10 minutes ago. 3 Replies 0 Likes
I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue
Dino Diaries - 165,567 Miles & Counting
Started by Jason Edge in General Discussion. Last reply by Jason Edge 16 minutes ago. 2 Replies 0 Likes
I always get a kick out of the expression when someone asks how many…Continue
Dino Diaries - Nov 19, 2024: Install Cad Plated Fender Skirt Brackets
Started by Jason Edge in General Discussion. Last reply by Jason Edge 22 minutes ago. 4 Replies 0 Likes
Now that I am past the radiator project (and a couple of house projects), I can pick away at the my 64 Coupe de Ville Dino a bit. Today I installed the left driver side cad plated fender skirt…Continue
Windshield washer pump inoperative
Started by Wayne Morris in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 7 hours ago. 16 Replies 0 Likes
I have spent a few hours trying to get pump to pump fluid. The lines are all clear, The pump Is working as it should when the washer button is pushed. I have a spare wiper motor assembly which I have…Continue
Blog Posts
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Events
Videos
© 2025 Created by Jason Edge.
Powered by
