Unknown part quiz , Episode 2
Hi all,
here are some parts under the hood of 64 Deville.
Do you recognize what they are?
- Attachments:
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
I will not answer these since I dismantle these cars all the time, but will give two hints:
- First two pictures are not under the hood... that is, not in the engine bay.
- Third picture is of bolts I just reinstalled in my fix of Dino.
-
Permalink Reply by Matti Roth on
-
Engine, transmission, front bumper, grille, lights, floor mat and seats are removed. Parts could be related to any of those.
-
-
Nope, head bolts are much bigger diameter than these bolts. Here are some more hints:
- bolts in 3rd picture are 1/4" diameter and bolts I have had cad plated and you can see if you pop the hood.. well if you hold your head at the right angle.
- 1st pic is brake related
- 2nd pic is transmission related
-
Permalink Reply by 2j58zilmgnj4h on
-
park brake cable clevis
trans mount to frame bolts and plate
and engine lifter valley pan bolts
-
-
Ding! Ding! Ding! You guys have a winner.
-
-
Thanks Maurice!!!
Members
Forum
Replace Choke Tube or Install Electric Choke?
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by CHRIS CARLSON yesterday. 8 Replies 1 Like
My mechanic has sourced a choke housing and new internals. As you might expect, the choke tube is damaged and or clogged. My options are to either replace the choke tube, or my mechanic recommends…Continue
Tags: Electric Choke, Choke Tube
TH400 Dipstick Tube Seal
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Buonaccorso on Monday. 10 Replies 0 Likes
In my “rebuild” of the transmission, I ordered a dipstick tube seal. However, I’m not sure if the right one came or how to best install the seal. I am wondering if anyone has replaced this seal OR…Continue
window regulators
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch on Saturday. 2 Replies 0 Likes
For years my winds have seemed to be looser and less accurate than most modern windows. I am thinking the soft parts are worn. Has anybody gone through thier window regulators and felts to restore…Continue
Correct whitewalls
Started by Richard Stanley in 1963/64 Cadillac Specific Discussion May 29. 0 Replies 0 Likes
I just replaced my tires from Diamondback (I had bad results in the past from Coker). It was the second time, due to the age of the tires. About 18 years ago Diamondback made custom whitewalls…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
© 2025 Created by Jason Edge.
Powered by
