Added by Jason Edge on February 28, 2014 at 8:56pm — No Comments
Well we (my son and I) have finally made it to the interior of our '63 Eldorado and thought we would find the original interior underneath the seat covers that had been installed, but instead we find an earlier reupholster job that is not done in the original design. So now we are seeking any advice, photos, etc. or information of any kind on the interior seats of a '63 Eldorado. Leads on interior shops that may be able to reupholster the seats would be great also!
Thanks for any help…
ContinueAdded by Les Eastling on February 28, 2014 at 10:43am — 2 Comments
I just signed up website member # 1000 and 1001 so a…
ContinueAdded by Jason Edge on February 27, 2014 at 10:35pm — 2 Comments
Added by Jason Edge on February 25, 2014 at 5:45pm — No Comments
Added by Jason Edge on February 24, 2014 at 10:33pm — No Comments
Added by Jason Edge on February 22, 2014 at 11:45am — No Comments
OK so my Rochester is on the 57 Fleetwood not the 64 but I know I can get some feedback here on the problem... Carby went off the car and went for a refurb. Engine would not idle and the idle screw would do nothing. There was no bakelite spacer which I believe feeds the air to the mixture screw but now have installed that. Carby back from refurb on it goes and same deal.. The idle screw does nothing and the engine blows lots of black smoke at idle (too rich I assume).. Any ideas what is…
ContinueAdded by john chalk on February 22, 2014 at 6:48am — 8 Comments
I was rolling around town today saw an upholstery shop so thought I'd stop and talk about my 63 sdv front seat.
He said about $100/yd. @3 yards + $250 labor.
Sound about right using the old leather?
This is a ways down the road, but just getting ideas on cost. Also, anyone ever put cruise on one of these things(aftermarket)?
Thanks for any insight
Tom B
Added by Tom Bahner on February 21, 2014 at 7:04pm — 1 Comment
A friend is looking for a new dash in good condition for his 1964 Series 62. His has several cracks and tears. It should be in the light blue color (code 33) if possible.
Added by Christian Doerk on February 21, 2014 at 4:20pm — 1 Comment
All CLC member should have received the recent email with CLC Museum construction updates. For those non-CLC members or others that did not receive updates regarding our Museum I have saved as a PDF file which you can read by clicking on:…
ContinueAdded by Jason Edge on February 21, 2014 at 8:30am — No Comments
I have a question. My 64 CDV is down for a complete paint and interior redo. When I disassembled the interior I found 4 hard rubber blocks under the front seat attachment bolts. Has anyone seen this before or did someone before me put these in to raise the height of the seat. Secondly, I was wanting to install new headlamps that would give better lighting for nighttime driving. Has anyone had experience installing the HID lighting in lieu of the standard sealbeams? Any advice would be…
ContinueAdded by Kevin Robles on February 21, 2014 at 12:04am — No Comments
Added by Jason Edge on February 20, 2014 at 10:49pm — No Comments
I had posted some pictures from the Cadillac LaSalle Club Museum Facebook page on our newsletter, but just saw this cool "in progress video". Check it out!
Added by Jason Edge on February 19, 2014 at 8:51pm — No Comments
I have just completed and posted the February 2014 1963/64 Cadillac Chapter newsletter to our …
ContinueAdded by Jason Edge on February 19, 2014 at 4:30pm — 2 Comments
Member Cadillac Spotlight
Rob Simon's
X-Men: First Class
1964 Series…
Added by Jason Edge on February 19, 2014 at 4:00pm — No Comments
Added by Jason Edge on February 18, 2014 at 5:34pm — No Comments
Hi guys. i need some advice from you. I recently joined the body and chassis together after several years of sparation. I had allso removed the front and rear springs. After i installed the rear springs the standing height wa almost 2" to high. I just the same springs. so my question is..............can springs become longer after many years of being not being loaded. How do i adjust the standing height. I must say that not everything is put back on the body. (no gastank. no Decklid, no rear…
ContinueAdded by Cees de Bunje on February 18, 2014 at 12:52pm — 10 Comments
Well, it looks like my seat motor decided to give up. Armature turns free, brushes are fine but no go.
Anyone out there have one. Thanks tbbahner@embarqmail.com
Tom B
Added by Tom Bahner on February 18, 2014 at 10:51am — 2 Comments
Hey guys,
hope you can help me one more.
I'm wondering how the correct wiring of the AC-compressor ground should be. If you do it like in the original shop manual on page 13-45 (Fig. 13-32, marked red), the compressor does not have any contact to…
ContinueAdded by Christian Doerk on February 18, 2014 at 6:24am — 4 Comments
Added by Jason Edge on February 17, 2014 at 10:28pm — No Comments
2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
Scott Santora Online
Started by Doug Scarrow in For Sale 12 hours ago. 0 Replies 0 Likes
just listed solid 1963 1964 non tilt steering wheel. https://www.ebay.com/itm/266784089004$120 plus shippingContinue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 22 hours ago. 9 Replies 0 Likes
I have a 64 Cadillac Deville convertible. When the wiper switch is turned on the washer pump activates continuosly no mater what speed is selected. Washer pump shuts off when wiper switch shut off.…Continue
Started by Russ Austin in For Sale. Last reply by Russ Austin yesterday. 2 Replies 0 Likes
I have 2 working T-3 low beam headlights and numerous T-3 high beam headlights for sale. Low beams are 22 each and high beams are 15.00 each plus shipping. Please email me at russ@thecadishack.com …Continue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Tuesday. 19 Replies 0 Likes
Neither of my cornering lights are working. I started by focusing on drivers side. I removed the entire assembly and cleaned it up, replaced the wire to the socket, cleaned and lubricated the socket…Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by