Several areas in my 64 SDV body need repair and attention. Front bumbers, grille and lights came separately with the car. There is one bigger rust damage behind passenger side front wheel. Windscreen has damage but I probably could pass MOT like it is now. Front bench fabric was badly broken in driver`s area. And many small things here and there.
I started by removing everything from trunk, and it was in quite original condition. Luckily no rust problems, only some brown old glue here and there. I vacuumed parts ajd put them back. Trunk fabric needs to be glued properly in place some day.
Tags:
Seat and carpets were removed when I got the car. I removed covers from seats, bought correct material from SMS and gave then to upholstery shop. Rear seat needs nothing but cleaning.
I cleaned the floor and gave it Bill Hirch Miracle Paint treatment. Carpets could cleaned somehow deeper, need to find a way for that.
Carpets have original padding under them but additionally there is a bunch a pieces of padding which should go between the floor and the carpet. And two black longer pieces as well! But which one goes where? This is like a big puzzle!!
Thanks Kurt.
I did not notice Cadillac crest there. These are original seats in the back.
For front seats I ordered fabric from SMS, took about 4-5 months. They said that this fabric had ran out and they had to make a new batch.
Wow, that seat turned out beautiful!
Thank you all for kind words. I am amazed how good condition the original parts are in the whole car. Seems that the only real problems are bumber lower buckets and rust damage under AC condenser. I got replacement buckets from USA but the driver side is somehow deformed and difficult to use.
This looks great. I want to do the same thing with my seat. the fabric on mine is whipped but the vinyl is almost perfect. I was advised by an upholster that it wouldn't be a good idea to replace just the fabric because too many stitching holes on the vinyl would cause the seams to tear easily. Did your upholster have a special way of re-sewing to avoid this problem?
Thanks Phil
to be honest I do not how she did it. I can ask next time. Old vinyl and leather was used. I plan to do something for leather areas one day.
this brings back memories. You have the same interior as i do in my '64 sedan deVille. I got my seat fabric from SMS also. Keep up the great work and keep posting pictures of your progress. We love PICTURES.
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks on Thursday. 5 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson Feb 15. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by