Hi I am new to this Discussion I currently purchasing a 64 Deville convertible and It has bias ply tires that are 15 year old they have L-78-15 tires and would like to put on radials . Question what is a good cross to radial tire and is l-78-15 the original tire size. Thanks Mark
Tags:
The 235/75R15 is a good match. Look into the Ironman tires for a white wall.
Hi Russ I am looking at the 235 75R15 in Ironman are those the RB12 after the tire size Thanks
Hey Russ what size white wall do you recommend and what was the stock width Thanks
I went with the ironmans, they ride well and feel good on the car. the width wall width is 1 inch. Not sure what the stock width is.
Original white wall width and distance from rim across the 3 tire suppliers is discussed in our Tires: Original Tires and Rims (Wheels) used on 1963 & 1964 Cad... Scroll down and you will see chart. Help Page.
Hi Russ looked at the Ironman Tires quite a few people are complaining the white wall turns brown after a year have you had this issue
Thank you Tony, So you agree with Russ Austin the 235 75 R15 ? Have you tried stick on weights for mag wheels?
I am surprised you don't run Bias Ply on your Eldo. I am strongly considering it for my 64 Fleetwood. By all accounts I have heard, the driving feel is better than radial. Bias Ply being softer. I am not a speed runner and most of the area around here is flat- so no large concerns there. The occasional jaunt on the freeway is the fastest I ever make it.
Logan
Thank you
I recently changed out my Eldo's bias ply tires for a set of radials, so I could drive the car and enjoy it a lot more.
I bought Coker's Firestone Steel Belted 721 LR78-15 "bias-look" radials with a very close to correct Cadillac 3/4" whitewall stripe. Matches the original spare in my car. Overall diameter 28.78".
Price was $334.00 each.
You can special-order tires similar to these from Diamondback (not sure Coker does this) with the sidewalls "blank", meaning there's no tire brand showing, only a size. Makes the tires look classier to me.
Mark. I just purchased a set of 820-15 Radial Damond back tires with a one inch whitewall they look very similar to the original tires which where 820-15 bias ply with a one inch white wall. $304.00 each. The original spare tire in the trunk was a 820-15 US Royal with a one inch white wall. I should have them in two weeks.
Not sure, but it i a white wall tire. I like them on my car.
Started by David Michael Bigeleisen in 1963/64 Cadillac Specific Discussion 16 hours ago. 0 Replies 0 Likes
Dear Cadillac friends:I have a 1963 Fleetwood.The transmission dipstick has bubbles in it when I check the fluid.Also, the transmission shudders when I drive up a slight incline in reverse.I had the…Continue
Started by Jason Edge in Chapter Discussion. Last reply by Jason Edge on Tuesday. 1 Reply 0 Likes
Here is a breakdown of the rate increases Effective April 1:E-membership…Continue
Started by Jason Edge in Newsletters on Tuesday. 0 Replies 0 Likes
Here is another sneak peak of our next newsletter feature - Denis Binette's 14K mile 1964 Coupe de Ville. I hope to have this distributed within the next couple of weeks. …Continue
Started by Jordan Johansen-Moe in 1963/64 Cadillac Specific Discussion. Last reply by CHRIS CARLSON on Saturday. 1 Reply 0 Likes
Hey everyone, I need to replace my transmission input seal before spring starts, I’ve been losing a lot of fluid post Sunday drive. I figured I’d do the rear main seal service bulletin at the same…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by