Matti Roth's Discussions (129)

Discussions Replied To (112) Replies Latest Activity

"Thanks Luke but I did not catch if your carb has that idle vent valve which I am poi…"

Matti Roth replied Aug 15, 2023 to Rochester 4GC idle vent valve?

6 Aug 16, 2023

"I kindly ask anyone who has original Rochester in his 64 to check if there is that i…"

Matti Roth replied Aug 15, 2023 to Rochester 4GC idle vent valve?

6 Aug 16, 2023

"Hi Logan Have you checked that the valve inside governor moves freely? That valve is…"

Matti Roth replied May 28, 2023 to Transmisson Rebuild Time?

6 Jun 4, 2023

"Thanks Jason. I used your posting to test, it worked, and now all works fine."

Matti Roth replied May 21, 2023 to My 64 Sedan Deville body reparations

35 Jan 11
Reply by Matti Roth

"Front parts in place! "

Matti Roth replied May 20, 2023 to My 64 Sedan Deville body reparations

35 Jan 11
Reply by Matti Roth

"Thank you Chris! Based on that article it will fit."

Matti Roth replied Mar 23, 2023 to Steering gear compatibility

2 Mar 23, 2023
Reply by Matti Roth

"I replaced only some of them. Those were corroded."

Matti Roth replied Mar 8, 2023 to 429 restoration

78 Mar 8, 2023
Reply by Matti Roth

"Thanks Phil to be honest I do not how she did it. I can ask next time. Old vinyl and…"

Matti Roth replied Jan 30, 2023 to My 64 Sedan Deville body reparations

35 Jan 11
Reply by Matti Roth

"Thanks Tony There is still work to do in fixing rust spot, getting Confort control t…"

Matti Roth replied Jan 21, 2023 to 429 restoration

78 Mar 8, 2023
Reply by Matti Roth

"Finally I got everything ready for the first start and 30 min break-in went well. Ba…"

Matti Roth replied Jan 21, 2023 to 429 restoration

78 Mar 8, 2023
Reply by Matti Roth

RSS

Photos

  • Add Photos
  • View All

Forum

Clock Removal

Started by Jeff Donaldson in General Discussion. Last reply by Jason Edge 15 hours ago. 2 Replies

Hello Everyone,I tried to remove my clock today and couldn't seem to get it to rotate more than a 16th to an 8th of an inch. I followed the instuctions in the manual (counterclockwise approximately…Continue

Dino Diaries - All Jacked Up For Christmas!

Started by Jason Edge in General Discussion yesterday. 0 Replies

I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue

Power Brake Booster

Started by Stephen Pechenik in General Discussion. Last reply by Bill Wolf yesterday. 13 Replies

Hello Co-Members,I recently purchased a  low mileage1963 Sedan Deville Park Avenue.  It is extremely solid and runs well.  Neverthelss, it has minor problems that need to be addressed before I can…Continue

Body side molding install help needed

Started by Wayne Morris in 1963/64 Cadillac Specific Discussion. Last reply by Wayne Morris on Saturday. 6 Replies

I am in the process of trying to install body side molding. I have completed installing the two front fender pieces and now trying ti figure out the rest.…Continue

Blog Posts

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

Events

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service