Russ Austin's Discussions (95)

Discussions Replied To (82) Replies Latest Activity

"You can get the rear mount at CaddyDaddy.com It is a better mount than the stock one…"

Russ Austin replied Feb 3, 2024 to Transmission Mounts

2 Feb 3, 2024
Reply by Logan Robb

"I use the stock booster and it does leave a little bit of wanting for the pedal pres…"

Russ Austin replied Feb 2, 2024 to 63 Booster Fitment

2 Feb 3, 2024
Reply by Mike Travers

"What clips do you have? "

Russ Austin replied Feb 1, 2024 to body side molding clips

5 Feb 4, 2024
Reply by Wayne Morris

"No problems, just lack of activity on the board. "

Russ Austin replied Jan 29, 2024 to test test

2 Jan 29, 2024
Reply by Russ Austin

"Since it can take up to 4-5 months to get an engine rebuilt, it does seem like a goo…"

Russ Austin replied Jan 15, 2024 to Engine Rebuild

2 Jan 15, 2024
Reply by Russ Austin

"A fan shroud is always better than no shroud. Shroud with a fan clutch and 7 blade f…"

Russ Austin replied Jan 10, 2024 to Cooling Fan on 64 Sedan Deville

5 Jan 11, 2024
Reply by Logan Robb

"Thats where I get my clocks rebuilt, you will have no problems. "

Russ Austin replied Jan 10, 2024 to Clock Repair

5 Jan 10, 2024
Reply by Dennis P. DiBari

"Remove the isolation diode from the scene. Run a switch power wire to the coil and t…"

Russ Austin replied Jan 7, 2024 to Pertronix Ignition Power Relay Installation.

11 Jan 12, 2024
Reply by Peter Greenway

"David, the 64 climate control system is the first year design, and a challenge to re…"

Russ Austin replied Jan 6, 2024 to 64 AC theory and practice

2 Jan 6, 2024
Reply by Russ Austin

"The gasket is probably burned through. I have copper gaskets that will not burn thro…"

Russ Austin replied Jan 1, 2024 to 1964 exhaust manifold bolts?

7 Jan 9, 2024
Reply by Tim

RSS

Photos

  • Add Photos
  • View All

Forum

Rare Society of Automotive Engineers "The 1964 Cadillac Comfort Control" 1964 publication

Started by Jeff Tepper in 1963/64 Cadillac Specific Discussion on Sunday. 0 Replies

HI all,I found this publication on Ebay last year and bought it immediately. No one has told me that they have ever seen or heard of this publication.It was put out by the Society of Automotive…Continue

Check out Marlina & David Stone's 1964 Coupe de Ville in January Self-Starter

Started by Jason Edge in Chapter Discussion. Last reply by Mack on Sunday. 2 Replies

We have another 63/64 Chapter Member spotlighted in the January 2025 Self-Starter.   In the "Letters to the Editor" section on page 6, you will see the picture below of Marlina & David Stone's…Continue

Christmas 2024 with the 1964 Fleetwood 60 Special

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge Jan 21. 3 Replies

A little late posting, but figured some may enjoy seeing it post holiday to keep the winter blues away!My wife, Annie, and I had a great time with the Fleetwood before the salt hit the roads here in…Continue

Anyone Ever Hear of or Use Gary's Steering Wheels

Started by Jason Edge in Restoration Discussion. Last reply by Chris Codd Jan 20. 3 Replies

Scanning thru the Feb issues of Hemmings I found a listing for Gary's Steering Wheels. I didn't think I had heard of them but looked on our …Continue

Blog Posts

'63 Tailfin Tales

Posted by Mark Mata on January 14, 2025 at 12:06am 1 Comment

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

Events

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service