Dino Wiper Swap
Yesterday I finally pulled my already very nice windshield wiper motor and washer pump assembly in my 64 Coupe de Ville 'Dino', to replace with a rebuilt unit I have had a couple of years and recorded a quick video before removing. Here is that video clip testing the one I removed, then a picture of the rebuilt one installed. Both were very nice motor/washer pump assembles. The old one went shipped out to a Chapter Member today.
Replies to This Discussion
-
Permalink Reply by Logan Robb on
-
Great video. Wondering if you could post a pic of the actual nozzles on the cowl? This is a future project on my 64 Fltwd and would like to come back to this thread.
-
Permalink Reply by Jason Edge on
-
Logan, Are yours missing? If so, I have plenty of the washer jet and nozzles as seen below for $10 each side. Email me at jasonedge64@outlook.com.
-
-
Based off of the photo, I suppose mine are not missing. I thought there to be some piece that connects to the end of the jet there. With the eye, it looks like it would shoot off to the side, not onto the w/s.
-Logan
Photos
Members
Forum
Title and Frame VIN section for sale
Started by Russ Austin in General Discussion. Last reply by Jason Edge 7 hours ago. 10 Replies 0 Likes
For sale is the #1 frame cross member that has the vehicle VIN on it. Comes with the matching Arizona title in my name. This is legal in Arizona, please check your state laws before putting this on…Continue
Steering gear compatibility
Started by Matti Roth in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth yesterday. 2 Replies 0 Likes
The steering gear in my 64 is leaking from steering shaft side and I need to rebuild it. I have used steering gear from 70`s Monte Carlo available. Is there any reason why not to use that temporarily…Continue
Current 1963/64 Cadillac Listings on eBay
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 1 Reply 5 Likes
To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue
Tags: ebay
Welcome 1963/64 Cadillac Chapter Members
Started by Jason Edge in Chapter Discussion. Last reply by Jason Edge on Wednesday. 404 Replies 4 Likes
Tags: chaptermember, newmember
Blog Posts
1964 power steering sector rebuild
Posted by CHRIS CARLSON on March 20, 2023 at 11:32pm 3 Comments 0 Likes
I'm having my steering sector rebuilt, and considering changing it from 20-1 ratio 4.2 turns lock to lock to 3.5 turns lock to lock @ 16-1 ratio, If i change from a 3 1/4" box to a 3" box i could have a 14-1 Ratio steering response would be faster, shorter distance to turn the wheel to get a response, has anyone done this? and how do you like it? thank you
1964 Daville dashboard clock
Posted by Willem Bol on March 13, 2023 at 11:33am 2 Comments 0 Likes
Hallo,
Can somebody help me finding a dashboard clock for my 1964 Cadillac DeVille Convertible?
Thank you in advance,
Willem Bol
The Netherlands
Does anyone know where I can get the bushings for AC compressor mount on the 429?
Posted by Robert Schles on February 21, 2023 at 11:45am 2 Comments 0 Likes
I've looked at the usual rubber sources but couldn't find any.
Need help with a hood latch
Posted by Curtis Dover on January 2, 2023 at 5:23pm 0 Comments 0 Likes
Hey guys, I need some help. Could someone send me some pictures on how the first hood release lever on a factory 1964 Cadillac is set up, where it comes though the grille. Not the secondary one. I need to know where the thumb or finger position is located through the grille. Is it above or below the center grille molding piece? Mine seems to be positioned behind the center molding piece and will not adjust above or below the molding. I have a wire tied to it to release it…
ContinueEvents
© 2023 Created by Jason Edge.
Powered by
