Hi Jason,

     I am looking to purchase a front fender splash guard bracket for my 1964 Series 62 - passenger side.  I saw your post from a few years back with the picture you posted.  Anywhere I can get this part?

Dennis DiBari, Cottekill, NY

Facebook Facebook

Views: 80

Reply to This

Replies to This Discussion

Is this the front lower bumper end splash apron bracket that is behind the splash apron seen below?  It runs diagonally across the front lower bumper end and has one splash apron attachment point in center for bottom section of the splash apron.
If so, let me know left or right?   If not, let me know which splash apron with a picture or more descripion.

Hi Jason,

     THANK YOU for sending me the picture of the apron.  That is the exact bracket you described and it is for the passenger side of my 1964 Series 62.  If you have any leads it would be most appreciated!  Thank you again.  Dennis DiBari

I checked and have one right side that has some corrosion but solid enough to support the masticated rubber splash apron.  You could also use it as a template to make a better one out of a piece of new steel. 

Price is $10 ($7.50 with Chapter Discount). If you need cadmium plated original 2 bolts and 2 nuts to secure to lower bumper end add $5.  I can ship for $10 for a total of $17.50 (bracket only) or $22.50 bracket and fasteners.

Hi Jason,

     I want to thank you for researching this for me and I would like to purchase the bracket and fasteners for the $20.50.  Please let me know the payment arrangements and I'll provide you with this immediately!  Thanks for looking into this.  I know you have been on the road the past few weeks!

Dennis DiBari

Dennis, Send PayPal to email jasonedge64@outlook.com. If you don't have PayPal I can send you an invoice so you can pay with credit or debit card.
Jason

Hi Jason,

     I don't have Pay Pal, so if you can send an invoice, I can pay with credit card or check for the items.  I'll send you an email with some information if that helps.

Thank You, Dennis

Jason,

     Thank you for helping me acquire this part for my 64 - Series 62.  I really appreciate it!

Dennis DiBari

RSS

Photos

  • Add Photos
  • View All

Forum

Gump(Pat Westphal) you’re a gosh darn genius!

Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal on Friday. 2 Replies

So I have been having problems with my brake lights. At first I thought it was both sides and turns out it is only the drivers side. Also, I thought the blinker worked and it didn’t and turned out…Continue

Front grill

Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Tuesday. 11 Replies

Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue

Steering slack/play

Started by Nile Bolen in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari Jul 21. 4 Replies

I checked the Help page and did a search on the site but didn't see any subjects on steering play/slack.  Since I had someone complete a front end rebuild (Kanter kit, all the control arm bushings,…Continue

Tags: box, play, steering

Add cruise control/Aftermarket Cruise control

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Vogler Jul 21. 12 Replies

Late in the evenings, I wonder about things I will probably never do as I am not that crazy. However, I know someone out there has tried it or wanted it bad enough they have done it. My 64 Fltwd did…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service