Unknown part quiz , Episode 2
Hi all,
here are some parts under the hood of 64 Deville.
Do you recognize what they are?
- Attachments:
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
I will not answer these since I dismantle these cars all the time, but will give two hints:
- First two pictures are not under the hood... that is, not in the engine bay.
- Third picture is of bolts I just reinstalled in my fix of Dino.
-
Permalink Reply by Matti Roth on
-
Engine, transmission, front bumper, grille, lights, floor mat and seats are removed. Parts could be related to any of those.
-
-
Nope, head bolts are much bigger diameter than these bolts. Here are some more hints:
- bolts in 3rd picture are 1/4" diameter and bolts I have had cad plated and you can see if you pop the hood.. well if you hold your head at the right angle.
- 1st pic is brake related
- 2nd pic is transmission related
-
Permalink Reply by 2j58zilmgnj4h on
-
park brake cable clevis
trans mount to frame bolts and plate
and engine lifter valley pan bolts
-
-
Ding! Ding! Ding! You guys have a winner.
-
-
Thanks Maurice!!!
Members
Forum
Front door handle lights not working
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt 23 hours ago. 1 Reply 0 Likes
My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue
lighted headlight switch
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf yesterday. 2 Replies 1 Like
I had to replace the heater core in my 63 SDV, so I decided to replace all the dash lights with LED's. and replaced all the vacuum lines. While I was in there, I added a light to the headlight switch…Continue
Rear suspension project
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Robert Alan Shannon on Tuesday. 9 Replies 0 Likes
I’m starting the complete rear suspension update/upgrade-new springs and shocks,replacing spherical joint and bushings on yoke and control links! Just wondering if there are any tips to help with the…Continue
TV rod adjustment 1963 Cad
Started by Mark Geertsma in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Tuesday. 4 Replies 0 Likes
I’m struggling with my TV rod adjustment. I’ve been trying to adjust it as per shop manual, but it’s still not OK. When cold, it shifts smoothly through all four gears, when hot, it hesitates (lots…Continue
Tags: adjustment, rod, TV
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
-
May 18, 2024 - 63/64 Cadillac Chapter Zoom Meet-Up
May 18, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by
