There was discussion on the CLC Forum about the Bill Hirsch vs Seymour Cadillac Blue and I ordered 3 cans of the Seymour paint and did a side by side paint test today in nice sunny, low humidity, no wind weather using both paints.

Either I ordered the wrong paint or in my eyes the Seymour paint is way off as it is quite a bit lighter and more blue-blue than the original paint.

For the test I used two primed engine valley covers. The one on the left was painted with Bill Hirsch…

I found this cool site a while back with pictures of different wheel covers from many makes and years and thought I would share on our Help Topics page

Here is the link posted:

GM Hubcaps (Wheel Covers): Pictures of Different Makes and Years…

I keep a filter running on Auto Trrader Classics but usually do not post here for lack of time.

Here are the current 5 offerings that were just sent to me via this link:…

I just posted some pictures of the 40th Parts Car to my Facebook Page at this link:

https://www.facebook.com/media/set/?set=a.10151882460410883.1073741884.573545882&type=1&l=e149199b35

There are a ton of great parts on this car - some will go to my 64 Coupe Deville and others to customers.  I got into pulling in parts cars back in 1996 first and…

As the fall approaches I'm going to address some areas on my 64 Coupe DeVille and will share restoration progress via message posts with photos and videos.  Some of the items such as the hood to shroud seal in this post are minor while some like repainting the dash, reinstalling the A/C, and others will be larger in scope.

I am not going to get in a rush but want to continue making some progress and see if I can get the Caddy…

I'm looking for a good transmission adaptor ring for a '64, no cracks. Please write me directly at Jeff@WillingtonCadillac.com. thanks, Jeff in CT

Here is the link: http://forums.cadillaclasalleclub.org/index.php?topic=126935.0

Here is the post:

1963 Cadillac Series 62 Coupe – Current owner's grandmother was the original owner – Restored in the late '90s – Featured in Vern Parker's Out of the…

Just a quick personal observation before heading in for the night. I was browsing through this month's Hemmings Motor news and knew there were companies that would repair and polish stainless trim but I counted 18 companies spread all over the US...several in FL. ...up east, out west.  I wanted to list a couple in our Help and/or Parts Suppliers page but don't have a clue which companies are the good ones and which ones are those you want to steer clear of?

Has anyone had any…

Hello everyone, I am considering the install of the basic pertronix unit, but wanted to ask if its required to remove the distributor from the engine to add the spacer above the gear at the bottom of the shaft? If yes why does this have to be done?

Gary

I have added 2 additional questions that will now be required for new requests to join the site including:

Cadillac LaSalle Club Member?  Membership #?

and

Member of the CLC 1963/64 Cadillac Chapter?

This was added to help filter out spammers try to join by requiring additional specific questions(one got thru a couple weeks ago if some of you remember, and identifying those website members that have also joined the CLC and our…