Kim K Kaiser's Discussions (1,247)

Discussions Replied To (941) Replies Latest Activity

"yeah,  I should have asked but I had no. idea it would be so high,, but, I guess I c…"

Kim K Kaiser replied Nov 9, 2023 to 1964 5-Blade Clutch Fan

4 Nov 9, 2023
Reply by Kim K Kaiser

"dont know if this applies, but there is a guy the rebuilds these clutch fans,,,right…"

Kim K Kaiser replied Nov 9, 2023 to 1964 5-Blade Clutch Fan

4 Nov 9, 2023
Reply by Kim K Kaiser

"I used on of the 50/50 antifreeze  products out there,  "

Kim K Kaiser replied Nov 7, 2023 to water pumps

5 Nov 7, 2023
Reply by Kim K Kaiser

"Ok,  thanks.  Hv a lot of small rock chip spots on the nose i wanted to get cleaned…"

Kim K Kaiser replied Aug 10, 2023 to Paint color formula

2 Aug 10, 2023
Reply by Kim K Kaiser

"It was intake manifold gasket.  I chged it while back and it disappeared"

Kim K Kaiser replied Aug 1, 2023 to Static sound in cab but actually whistle when moving air cover off

5 Aug 1, 2023
Reply by Kim K Kaiser

"that's what was wrong w mine when my windows went wonky, I lulled that rubber boot o…"

Kim K Kaiser replied Nov 11, 2022 to Door Jamb Wiring Issue

14 Nov 12, 2022

"I hvnt been able to work on car due to weather. Went out today and it started fine.…"

Kim K Kaiser replied Oct 23, 2022 to 63 cdv starting/starter/solenoid??

8 Oct 23, 2022
Reply by Kim K Kaiser

"Russ, Jason,, I m running without a NSS.. the one I got from Russ a while back crack…"

Kim K Kaiser replied Oct 21, 2022 to 63 cdv starting/starter/solenoid??

8 Oct 23, 2022
Reply by Kim K Kaiser

"on my 73, it was the bearing, I replaced it, and it stopped,, "

Kim K Kaiser replied Oct 19, 2022 to Noisy A/C compressor

6 Oct 19, 2022
Reply by Kim K Kaiser

"I took mine off.. during rebuild, I had it welded together.  it still worked after w…"

Kim K Kaiser replied Oct 8, 2022 to Heat riser and blocked intake manifold gasket

12 Oct 9, 2022
Reply by Jason Edge

RSS

Photos

  • Add Photos
  • View All

Forum

Bleeding brakes

Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin 10 hours ago. 3 Replies

I have finished replacing all the rear suspension and am at the last item, which is bleeding the rear brakes. I am using the Jason Edge vacuum pump method and all went well with the rear passenger…Continue

Front grill

Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 8 Replies

Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue

Getting hot when going fast…

Started by Mack in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Tuesday. 6 Replies

So… I do have a few of 63 Coupes, all have same setup with carbs, Pertronix, shroud, new US Radiator radiators etc … but only one of them gets a bit hot when I am hauling faster than 60mph and car…Continue

Rainstorm out of nowhere!

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply

After dinner last night, we went for a quick cruise as the weather was cooler and the sun set was looking really good!Out of nowhere, a pop up shower appeared overhead and down-poured as we were…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service