I'm a new owner of a beautiful survivor 64 Sedan Deville. Shes missing a bolt on the back lower passenger side exhaust manifold. I was told by the seller its a unique bolt? I'd like to try and fix it by next weekend as she does the put put under acceleration. Any help or ways to point me to the correct part are greatly appreciated!
Tags:
The 12 factory exhaust manifold to cylinder head bolts has a 9/16" hex head, thread is 7/16x14. The two left driver side rear bolts are 1 1/2” long & others are 2 1/4” long. The bolt shank size (7/16"x14) is a common size and you can find bolts with this thread at hardware stores but that 9/16" hex head is smaller than the standard 5/8" hex head found on most 9/16" bolts. I have plenty of the longer original 2 1/4" long bolts and like the one missing on your passenger side.
I sell that bolt in very good condition for $3 each, which drops to $2.25 with 25% Chapter discount. If interested email me at jasonedge64@outlook.com. If keeping the exact bolt head appearance is not important, you can find the 7/16"-14, 2 1/4" long bolts at places like www.boltdepot.com. You just want to make sure you get the Grade 5 or Grade 8 (preferred), hardened bolt. I am showing the bolt depot price of $1.39. Click Here to check it out. You may also be able to find the bolt at the local hardware and home improvement stores. Again, if you want the exact original bolt I have it.
You can order an new aftermarket Grade 8 thru Bolt Depot (or perhaps find at local hardware store), or shoot me an email and I will give you a total with shipping and I can have one shipped Priority as soon as tomorrow.
The gasket is probably burned through. I have copper gaskets that will not burn through or soften up.
Please email me at russ@thecadishack.com
Started by Joe McDonald in General Discussion 1 hour ago. 0 Replies 0 Likes
Hey all,Not sure if this is the right section of the forum to post this or not. I just picked up this 1964 Coupe deVille. I'm the third owner on it and it appears to have been a Spokane Washington…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies 0 Likes
As the Fall Festival approaches, I am finding myself curious if anyone else will be attending from the group?I am hauling my Fleetwood up. I am hoping to see lots of other 64’s!Continue
Started by Jason Edge in General Discussion. Last reply by Jason Edge Sep 1. 3 Replies 0 Likes
Started by Daniela in 1963/64 Cadillac Specific Discussion. Last reply by Doug Scarrow Aug 31. 10 Replies 0 Likes
All,I can’t believe I have to ask for help again. I really thought I was done with repairs. I did drive my 63 Eldorado a couple of times on side roads and all was good. last week I took it out bc it…Continue
Tags: overheating, transmission, NewRadiator
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
© 2024 Created by Jason Edge.
Powered by