Several areas in my 64 SDV body need repair and attention. Front bumbers, grille and lights came separately with the car. There is one bigger rust damage behind passenger side front wheel. Windscreen has damage but I probably could pass MOT like it is now. Front bench fabric was badly broken in driver`s area. And many small things here and there.

I started by removing everything from trunk, and it was in quite original condition. Luckily no rust problems, only some brown old glue here and there. I vacuumed parts ajd put them back. Trunk fabric needs to be glued properly in place some day.

Views: 955

Reply to This

Replies to This Discussion

Seat and carpets were removed when I got the car. I removed covers from seats, bought correct material from SMS and gave then to upholstery shop. Rear seat needs nothing but cleaning.

I cleaned the floor and gave it Bill Hirch Miracle Paint treatment. Carpets could cleaned somehow deeper, need to find a way for that.

Carpets have original padding under them but additionally there is a bunch a pieces of padding which should go between the floor and the carpet. And two black longer pieces as well! But which one goes where? This is like a big puzzle!!

I installed sound deadening insulation material to floor and added original padding and carpets. Somehow I want to use original parts as much as possible even when that is maybe not the optimal solution.


Original carpet is in good condition. 

That sound deadening material has a Louis Vuitton appearance. Very fancy! : )

Rear seat getting ready. Front seat is waiting for repaired cover from upholstery shop. I got new fabric from SMS. Rear seat is all original.

The back seat looks fantastic. Did they not emboss the Cadillac crest in the seat like they did in 1963? Just curious. Did you order fabric, leather and vinyl from SMS? How long did it take from purchase to delivery? I think mine took about 6 months back in 2006.

 

Thanks Kurt.

I did not notice Cadillac crest there. These are original seats in the back. 
For front seats I ordered fabric from SMS, took about 4-5 months. They said that this fabric had ran out and they had to make a new batch.

Front seat is slowly getting ready. New fabric is from SMS, and original vinyl and leather pieces were used. Upholstery shop did great work! I cleaned and painted the frames, and installed covers and buttons. Next step is to put 6way mechanism back after cleaning and refresh. 

Wow, that seat turned out beautiful! 

Thank you all for kind words. I am amazed how good condition the original parts are in the whole car. Seems that the only real problems are bumber lower buckets and rust damage under AC condenser. I got replacement buckets from USA but the driver side is somehow deformed and difficult to use.

This looks great. I want to do the same thing with my seat.  the fabric on mine is whipped but the vinyl is almost perfect. I was advised by an upholster that it wouldn't be a good idea to replace just the fabric because too many stitching holes on the vinyl would cause the seams to tear easily. Did your upholster have a special way of re-sewing to avoid this problem?  

Thanks Phil

to be honest I do not how she did it. I can ask next time. Old vinyl and leather was used. I plan to do something for leather areas one day.

this brings back memories. You have the same interior as i do in my '64 sedan deVille. I got my seat fabric from SMS also. Keep up the great work and keep posting pictures of your progress. We love PICTURES.

RSS

Photos

  • Add Photos
  • View All

Forum

Clock Removal

Started by Jeff Donaldson in General Discussion. Last reply by Jason Edge yesterday. 2 Replies

Hello Everyone,I tried to remove my clock today and couldn't seem to get it to rotate more than a 16th to an 8th of an inch. I followed the instuctions in the manual (counterclockwise approximately…Continue

Dino Diaries - All Jacked Up For Christmas!

Started by Jason Edge in General Discussion on Monday. 0 Replies

I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue

Power Brake Booster

Started by Stephen Pechenik in General Discussion. Last reply by Bill Wolf on Monday. 13 Replies

Hello Co-Members,I recently purchased a  low mileage1963 Sedan Deville Park Avenue.  It is extremely solid and runs well.  Neverthelss, it has minor problems that need to be addressed before I can…Continue

Body side molding install help needed

Started by Wayne Morris in 1963/64 Cadillac Specific Discussion. Last reply by Wayne Morris on Saturday. 6 Replies

I am in the process of trying to install body side molding. I have completed installing the two front fender pieces and now trying ti figure out the rest.…Continue

Blog Posts

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service