Valve stem seals for 429?
Hello!
I am rebuilding 429 for 64 DeVille and got Felpro head gasket kit including valve stem seals. Is it recommended to install those even though they are not originally used? O-rings will be installed of course.
thanks in advance!
- Attachments:
Replies to This Discussion
-
Permalink Reply by 24ro8f5mbs2jc on
-
Hi Matti,
Yes its recommended. If you are able to read Swedish you can get additional information from TA Motor (best Company for Cadillac parts in Sweden).
-
Permalink Reply by Matti Roth on
-
Tack Anders! Jag har redan köpt ganska mycket från TA.
-
-
These kids today, I don't understand a word they say!
-
-
Thanks!
I am rebuilding it all by myself, with shop manual and other instructions. I have all the time in the world to get it right.
I am using original cam, crank, pistons, lifters, push rods, block, heads, valves, rocker arms. I need to replace 3 valves and 4 rocker arms only. Plus oil pump gears. New rings of course. Do I still need to do the break in run?
-
-
My concern is if the valve stem seals stay in the valve guides because they were not there originally. Are those 429 valve guides designed to keep stem seals in place?
If seals get loose they could create problems under rocker cover. I wonder if anyone in this group has added them.
Members
Forum
Replacement Front Crankshaft Seal - 1964 Eldorado (429ci)
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion 9 hours ago. 0 Replies 0 Likes
My mechanic is having difficulty sourcing a front crankshaft seal. Can anyone recommend a replacement front crankshaft seal, and where to purchase? Amazon has a few that I think(?) are replacements…Continue
Tags: Seal, Crankshaft, Front
Logans Intake Project, 1964 Fleetwood, Progress Report #2
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin 12 hours ago. 1 Reply 0 Likes
Hello all!Just a short update this evening!I wrestled with the exhaust manifold studs and ultimately chickened out on replacing all 4 of the studs. I only replaced the stud that I spun the threads…Continue
Rear main seal
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson 20 hours ago. 5 Replies 0 Likes
Hi Everyone can somebody tell me where I can get a reliable rear main seal?I have done the end cap modification and replaced the seal twice,after around 500 miles it starts to leak again,not as bad…Continue
Scout Shows up in the Garage with "Man Bun" to Work on Cadillac!
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari yesterday. 1 Reply 0 Likes
Cheryl brought my 4 1/2 month old boy Scout out to the garage in a man-bun to help work on the Cadillac. Sometimes you just have to roll with it! (I am scared to see who she will "dress up" Bandit…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
