Does anyone have a working ‘64 Convertible top switch like the one pictured below that you would be willing to sell, or have a lead on where I can get one? The new so-called “replacement” switch doesn’t fit the panel hole correctly nor the original mounting bracket. (And it looks different than the original! 😁).
Mike
Tags:
…or know of a place that can rebuild my switch?
Have you tested the switch with a continuity tester to confirm it is not working, and that your problem is not in wiring or elsewhere? These are pretty simple switches with contacts that bend down and make contact and close circuit when switch button is pushed one way or the other. Sometimes contacts just need to be cleaned or bent a little. Send it to me and would be glad to repair for free.. you would just pay for shipping it back.
Hi Jason,
Thank you for the reply and kind offer to repair my switch.
iThe problem is the switch, which I have been gingerly using for the past couple of years. With the dash restoration and having to remove the switch. When putting back in and testing on the circuit, it sparked and upon removal for inspection, a pin came out along with a small piece of the plastic casing. (I had one of the ugly 3 pin “reproduction” to test the circuit and it works just fine, except the new switch is hanging out of the hole; a temporary thing to get the top up and down). If you think with the broken pin it is still reparable, I will send it to you. Btw there is a broken clip on it.
Thank you again for your advice and repair offer.
Mike
I have the base and clips from other switches and should be able to repair yours. Let's say $10 for replacement parts. If interested in me repairing send to
Jason Edge
104 New Rand Rd
Garner, NC 27529
Note I will be shutting down around this Friday for my trip to Gettysburg and the GN so if I get it say by Wednesday I should be able to get it shipped out before I leave.
Thank you, Jason.
I’ll get it out to you tomorrow, overnight.
Mike
Good Morning, Jason,
I shipped the switch today by UPS 2nd day. You should receive it by Wednesday. Thank you, again.
Mike
Mike, The switch was received today and has been repaired. Check your email.
Jason.
You are amazing! Thank you.
Mike.
Travis J. Hensley Online
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal on Friday. 2 Replies 0 Likes
So I have been having problems with my brake lights. At first I thought it was both sides and turns out it is only the drivers side. Also, I thought the blinker worked and it didn’t and turned out…Continue
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Tuesday. 11 Replies 0 Likes
Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue
Started by Nile Bolen in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari Jul 21. 4 Replies 0 Likes
I checked the Help page and did a search on the site but didn't see any subjects on steering play/slack. Since I had someone complete a front end rebuild (Kanter kit, all the control arm bushings,…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Vogler Jul 21. 12 Replies 0 Likes
Late in the evenings, I wonder about things I will probably never do as I am not that crazy. However, I know someone out there has tried it or wanted it bad enough they have done it. My 64 Fltwd did…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by