Is there anything special about the wiper blades I should use on my '63 Series 62 convertible? I have the original arms with the original blade brackets. I got Anco N-18R blades that should fit. I installed them on the arms. but they seemed loose, so I took apart the old blades and moved the rubber from the Anco blade to the metal spine in the prior blade. It's still not great. Given there don't seem to be any prior threads on this topic I suspect I am making tis wiper blade replacement harder than it should be.

Any suggestions for the replacement wiper blades that people use and that fit well?

Thanks,

Karl Schwarz
Centreville, VA

Facebook Facebook

Views: 254

Reply to This

Replies to This Discussion

Russ here on the forums has a stash of them. He should be able to help you out. 

I have new wiper blade refills for 20.00 a set plus shipping.  

email me at  russ@thecadishack.com    I will need your zip code for a shipping quote. 

I have been using and selling Anco U-18R refills for about 15 years and sell for $10 a set.  I have never used or sold the N-18R blades but the U-18R is s tight fit in the original blade holder.  I currently have about 8 sets. You may be able to find them for less but feel that is a fair price. If interested email me at jasonedge@nc.rr.com 

I believe the “N” refills were the narrow width refills, mainly for import cars in the 80’s back then.  The “U” refills were the standard American width at that time.

Karl, I have replied to your emails with no return reply. You asked for 2 sets of these in one email and I indicated 2 sets (4 blades) with shipping to US destinations would be $30. If not getting my emails check your spam folder. You can also message me here on the 63/64 site. I will assume you have what you need if no response. Jason.

RSS

Photos

  • Add Photos
  • View All

Forum

Gump(Pat Westphal) you’re a gosh darn genius!

Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal on Friday. 2 Replies

So I have been having problems with my brake lights. At first I thought it was both sides and turns out it is only the drivers side. Also, I thought the blinker worked and it didn’t and turned out…Continue

Front grill

Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari Jul 22. 11 Replies

Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue

Steering slack/play

Started by Nile Bolen in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari Jul 21. 4 Replies

I checked the Help page and did a search on the site but didn't see any subjects on steering play/slack.  Since I had someone complete a front end rebuild (Kanter kit, all the control arm bushings,…Continue

Tags: box, play, steering

Add cruise control/Aftermarket Cruise control

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Vogler Jul 21. 12 Replies

Late in the evenings, I wonder about things I will probably never do as I am not that crazy. However, I know someone out there has tried it or wanted it bad enough they have done it. My 64 Fltwd did…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service