I need the front bench seat reupholstered with original style material. This is a 1963 Park Avenue with #44 Trim. If anyone can suggest a Cadillac experienced upholsterer it will be appreciated. thank you.

Views: 194

Reply to This

Replies to This Discussion

SMS auto fabric stocks reproduction original materials.  Start there and get in touch with a local upholstery shop.

Thank you. I have contacted SMS and they will send a sample for me to check the match.

Just be aware they take time. A lot of time. Expect the sample in a month. After ordering and paying the full amount expect at least three months waiting before you have the materials.

Just to add, almost any upholstery shop with any history of working on old cars will be very aware of SMS Auto Fabrics. When I had my seats redone my local old school upholstery shop were able to order my Sandalwood Dover fabric for my seats direct from SMS st a discounted price.

   If you are doing just the front seats because the back ones are fine, and in many cases they are, make sure you get a large sample to make sure they match. They probably made different run lots and they can be a few shades off and you won't see it until until you reinstall them. A small sample may not show the difference.  I ran into this when I did my 76 Coupe De Ville.  good luck

RSS

Photos

  • Add Photos
  • View All

Forum

Christmas 2024 with the 1964 Fleetwood 60 Special

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Wednesday. 3 Replies

A little late posting, but figured some may enjoy seeing it post holiday to keep the winter blues away!My wife, Annie, and I had a great time with the Fleetwood before the salt hit the roads here in…Continue

Anyone Ever Hear of or Use Gary's Steering Wheels

Started by Jason Edge in Restoration Discussion. Last reply by Chris Codd on Tuesday. 3 Replies

Scanning thru the Feb issues of Hemmings I found a listing for Gary's Steering Wheels. I didn't think I had heard of them but looked on our …Continue

Dino Diaries - Nov 19, 2024: Install Cad Plated Fender Skirt Brackets

Started by Jason Edge in General Discussion. Last reply by Jason Edge Jan 17. 6 Replies

Now that I am past the radiator project (and a couple of house projects), I can pick away at the my 64 Coupe de Ville Dino a bit.  Today I installed the left driver side cad plated fender skirt…Continue

Dino Diaries - All Jacked Up For Christmas!

Started by Jason Edge in General Discussion. Last reply by Logan Robb Jan 16. 4 Replies

I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue

Blog Posts

'63 Tailfin Tales

Posted by Mark Mata on January 14, 2025 at 12:06am 1 Comment

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service